UDA1334 i2s DAC with ESP32 - sketch too big

clovisf
Posts: 1
Joined: Wed Oct 23, 2024 2:20 pm

UDA1334 i2s DAC with ESP32 - sketch too big

Postby clovisf » Wed Oct 23, 2024 2:23 pm

  1. I am trying to implement a web radio streaming device with ESP32 (DEVKITV1 from Aliexpress) and UDA1334A DAC. The problem is that when compiling in the Arduino IDE (2.3.3 nightly) I get the "sketch too big" error:
  2.  
  3. [quote]Sketch uses 1356645 bytes (103%) of program storage space. Maximum is 1310720 bytes. [/quote]
  4.  
  5. The sketch from this source https://electropeak.com/learn/interfacing-uda1334a-i2s-stereo-decoder-module-with-esp32/ is actually garbage, does not even compile. I made it try to compile (with the too big error) by adding the missing "()" in every single function.
  6.  
  7. The sketch from this source https://how2electronics.com/simple-esp32-internet-web-radio-with-oled-display/ actually tries to compile (gets the too big error), I even stripped it from the display part to try and save space.
  8.  
  9. In the Arduino IDE I tried to select both "uPesy ESP32 Wroom DEVkit" and "DO IT ESP32 DEVkit V1" as boards, no difference (still get the "sketch too big" error).
  10.  
  11. Any ideas as to why a sketch supposedly working (from a tutorial) does not compile?
  12.  
  13. EDIT: This is the full code that tries to compile (but still is flagged as too big of a sketch):
  14.  

Code: Select all

#include "Arduino.h"
#include "Audio.h"
#include 
#include 
 
//Digital I/O used  //Makerfabs Audio V2.0
#define I2S_DOUT 27
#define I2S_BCLK 26
#define I2S_LRC 25
 
//SSD1306
#define MAKEPYTHON_ESP32_SDA 4
#define MAKEPYTHON_ESP32_SCL 5
#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 64 // OLED display height, in pixels
#define OLED_RESET -1    // Reset pin # (or -1 if sharing Arduino reset pin)
 
Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);
 
//Button
const int Pin_vol_up = 39;
const int Pin_vol_down = 36;
const int Pin_mute = 35;
 
const int Pin_previous = 15;
const int Pin_pause = 33;
const int Pin_next = 2;
 
Audio audio;
 
const char *ssid = "Alexahome";
const char *password = "loranthus";
 
 
struct Music_info
{
    String name;
    int length;
    int runtime;
    int volume;
    int status;
    int mute_volume;
} music_info = {"", 0, 0, 0, 0, 0};
 
int volume = 21;
int mute_volume = 0;
 
int runtime = 0;
int length = 0;
 
String stations[] = {
    "0n-80s.radionetz.de:8000/0n-70s.mp3",
    "mediaserv30.live-streams.nl:8000/stream",
    "www.surfmusic.de/m3u/100-5-das-hitradio,4529.m3u",
    "stream.1a-webradio.de/deutsch/mp3-128/vtuner-1a",
    "mp3.ffh.de/radioffh/hqlivestream.aac", //  128k aac
    "www.antenne.de/webradio/antenne.m3u",
    "listen.rusongs.ru/ru-mp3-128",
    "edge.audio.3qsdn.com/senderkw-mp3",
    "macslons-irish-pub-radio.com/media.asx"};
int station_index = 0;
int station_count = sizeof(stations) / sizeof(stations[0]);
 
void setup()
{
    //IO mode init
    pinMode(Pin_vol_up, INPUT_PULLUP);
    pinMode(Pin_vol_down, INPUT_PULLUP);
    pinMode(Pin_mute, INPUT_PULLUP);
    pinMode(Pin_previous, INPUT_PULLUP);
    pinMode(Pin_pause, INPUT_PULLUP);
    pinMode(Pin_next, INPUT_PULLUP);
 
    //Serial
    Serial.begin(115200);
 
    //LCD
    Wire.begin(MAKEPYTHON_ESP32_SDA, MAKEPYTHON_ESP32_SCL);
    // SSD1306_SWITCHCAPVCC = generate display voltage from 3.3V internally
    if (!display.begin(SSD1306_SWITCHCAPVCC, 0x3C))
    { // Address 0x3C for 128x32
        Serial.println(F("SSD1306 allocation failed"));
        for (;;)
            ; // Don't proceed, loop forever
    }
    display.clearDisplay();
    logoshow();
 
    //connect to WiFi
    Serial.printf("Connecting to %s ", ssid);
    WiFi.begin(ssid, password);
    while (WiFi.status() != WL_CONNECTED)
    {
        delay(500);
        Serial.print(".");
    }
    Serial.println(" CONNECTED");
    lcd_text("Wifi CONNECT");
 
    //Audio(I2S)
    audio.setPinout(I2S_BCLK, I2S_LRC, I2S_DOUT);
    audio.setVolume(21); // 0...21
 
    open_new_radio(stations[station_index]);
}
 
uint run_time = 0;
uint button_time = 0;
 
void loop()
{
    audio.loop();
    print_song_time();
 
    //Display logic
    if (millis() - run_time > 1000)
    {
        run_time = millis();
        display_music();
    }
 
    //Button logic
    if (millis() - button_time > 300)
    {
        if (digitalRead(Pin_next) == 0)
        {
            Serial.println("Pin_next");
            if (station_index  0)
            {
                station_index--;
            }
            else
            {
                station_index = station_count - 1;
            }
            button_time = millis();
            open_new_radio(stations[station_index]);
        }
        if (digitalRead(Pin_vol_up) == 0)
        {
            Serial.println("Pin_vol_up");
            if (volume  0)
                volume--;
            audio.setVolume(volume);
            button_time = millis();
        }
        if (digitalRead(Pin_mute) == 0)
        {
            Serial.println("Pin_mute");
            if (volume != 0)
            {
                mute_volume = volume;
                volume = 0;
            }
            else
            {
                volume = mute_volume;
            }
            audio.setVolume(volume);
            button_time = millis();
        }
        if (digitalRead(Pin_pause) == 0)
        {
            Serial.println("Pin_pause");
            audio.pauseResume();
            button_time = millis();
        }
    }
 
    //Serial logic
    if (Serial.available())
    {
        String r = Serial.readString();
        r.trim();
        if (r.length() > 5)
        {
            audio.stopSong();
            open_new_radio(r);
        }
        else
        {
            audio.setVolume(r.toInt());
        }
    }
}
 
void print_song_time()
{
    runtime = audio.getAudioCurrentTime();
    length = audio.getAudioFileDuration();
}
 
void open_new_radio(String station)
{
    audio.connecttohost(station);
    runtime = audio.getAudioCurrentTime();
    length = audio.getAudioFileDuration();
    Serial.println("**********start a new radio************");
}
 
void display_music()
{
    int line_step = 24;
    int line = 0;
    char buff[20];
    ;
    sprintf(buff, "RunningTime:%d",runtime);
 
    display.clearDisplay();
 
    display.setTextSize(1);              // Normal 1:1 pixel scale
    display.setTextColor(SSD1306_WHITE); // Draw white text
 
    display.setCursor(0, line); // Start at top-left corner
    display.println(stations[station_index]);
    line += line_step * 2;
 
    display.setCursor(0, line);
    display.println(buff);
    line += line_step;
 
    display.display();
}
 
void logoshow(void)
{
    display.clearDisplay();
 
    display.setTextSize(2);              // Normal 1:1 pixel scale
    display.setTextColor(SSD1306_WHITE); // Draw white text
    display.setCursor(0, 0);             // Start at top-left corner
    display.println(F("My ESP32"));
    display.setCursor(0, 20); // Start at top-left corner
    display.println(F("WEB` RADIO"));
    display.setCursor(0, 40); // Start at top-left corner
    display.println(F(""));
    display.display();
    delay(2000);
}
 
void lcd_text(String text)
{
    display.clearDisplay();
 
    display.setTextSize(2);              // Normal 1:1 pixel scale
    display.setTextColor(SSD1306_WHITE); // Draw white text
    display.setCursor(0, 0);             // Start at top-left corner
    display.println(text);
    display.display();
    delay(500);
}
 
//**********************************************
// optional
void audio_info(const char *info)
{
    Serial.print("info        ");
    Serial.println(info);
}
void audio_id3data(const char *info)
{ //id3 metadata
    Serial.print("id3data     ");
    Serial.println(info);
}
 
void audio_eof_mp3(const char *info)
{ //end of file
    Serial.print("eof_mp3     ");
    Serial.println(info);
}
void audio_showstation(const char *info)
{
    Serial.print("station     ");
    Serial.println(info);
}
void audio_showstreaminfo(const char *info)
{
    Serial.print("streaminfo  ");
    Serial.println(info);
}
void audio_showstreamtitle(const char *info)
{
    Serial.print("streamtitle ");
    Serial.println(info);
}
void audio_bitrate(const char *info)
{
    Serial.print("bitrate     ");
    Serial.println(info);
}
void audio_commercial(const char *info)
{ //duration in sec
    Serial.print("commercial  ");
    Serial.println(info);
}
void audio_icyurl(const char *info)
{ //homepage
    Serial.print("icyurl      ");
    Serial.println(info);
}
void audio_lasthost(const char *info)
{ //stream URL played
    Serial.print("lasthost    ");
    Serial.println(info);
}
void audio_eof_speech(const char *info)
{
    Serial.print("eof_speech  ");
    Serial.println(info);
}

horace99
Posts: 12
Joined: Mon Oct 14, 2024 10:38 am

Re: UDA1334 i2s DAC with ESP32 - sketch too big

Postby horace99 » Sun Oct 27, 2024 9:20 am

try changing the Partition scheme
click Tools>Board select ESP32 Dev Board under Partition Scheme select Huge App

Who is online

Users browsing this forum: No registered users and 105 guests