nimble_host: No runtime?

[DrMickeyLauer]

My application primarily communicates via BLE w/ an L2CAP COC. After letting it work for a while, I view a task dump:

Code: Select all

ECUconnect> tasks
+----------------------+-----+-----+-----------+-------+-------+
| Task                 | AFN | PRI | Run Time  | Load  | Stack |
+----------------------+-----+-----+-----------+-------+-------+
| Tmr Svc              | 0 B |   1 |         0 |    0% |  3372 |
| w5500_tsk            | . B |  15 |         0 |    0% |  7424 |
| httpd                | . B |   5 |         0 |    0% |  2068 |
| Console              | . R |   1 |      1043 |    0% |   460 |
| CANyoneroTCP         | . B |   1 |        65 |    0% |  1900 |
| esp_timer            | 0 S |  22 |        60 |    0% |  3040 |
| ESP-MCP251XFD.I      | 1 B |  23 |         0 |    0% |  2156 |
| sys_evt              | 0 r |  20 |      1352 |    0% |   404 |
| tiT                  | . B |  18 |         0 |    0% |  1112 |
| main                 | 0 B |   1 |         0 |    0% |   676 |
| wifi                 | 0 B |  23 |       339 |    0% |   840 |
| btController         | 0 B |  23 |       178 |    0% |  1988 |
| ipc0                 | 0 S |   1 |         0 |    0% |   184 |
| ipc1                 | 1 S |  24 |         0 |    0% |   480 |
| nimble_host          | 0 B |  21 |         0 |    0% |   292 |
| MCP-Receiver         | 1 B |  23 |       136 |    0% |  1240 |
| IDLE1                | 1 r |   0 |     98672 |   49% |   692 |
| IDLE0                | 0 r |   0 |     98649 |   49% |   700 |
+----------------------+-----+-----+-----------+-------+-------+

How is it possible that `nimble_host` has **zero** runtime? Is this not being used at all for BLE?

[DrMickeyLauer]

Darn... I'm stupid. This is NOT the accumulated runtime.