Cannot connect with ESP32-S3-DEVKIT

[orbitcoms]

I am having trouble connectiong to the ESP32-S3-Devkit.
The machine is running Windows 11 and the latest version of VSCODE.
I have a USB cable connected to the "USB" port of the Devkit.
The device shows up in the Windows devices list under Universal Serial Bus Devices as "Espressif CDC Device".
In VSCODE I selected ESP32-S3 device and "ESP-S3 Chip(use built-in USB-JTAG)

After code is comiple and I attempt to flash I get prompted: "OpenOCD is not running. do you want to launch it?"

Selected "YES"

Info: esp_usb_jtag: VID set to 0x303a and PID to 0x1001
Info" esp_usb_tag: capabilities descriptor set to 0x2000

[OpenOCD]
warn: Transport "jtag" was already selected

[OpenOCD]
Info: listening on port 6666 for tcl connections
[OpenOCD]
Info: listening on port 444 for telnet connections
[OpenOCD]
Error: esp_usb_jtag: could not find or open device