Silicognition wESP32 Ethernet (power up timeout)

[defbu123]

Hello,

I've got an Sillicognition wESP32 (revision 7 with RTL8201 chip) connected to my computer via the programmer.

If I run the code below (the code originates from the documentation), I'll get the following error:

Code: [Select all] [Expand/Collapse]

1. 19:55:22.704 -> E (133) rtl8201: rtl8201_pwrctl(252): power up timeout
2. 19:55:22.704 -> E (133) rtl8201: rtl8201_init(334): power control failed
3. 19:55:22.746 -> E (133) esp_eth: esp_eth_driver_install(215): init phy failed

GeSHi © Codebox Plus Extension

Code: [Select all] [Expand/Collapse]

1. #include <ETH.h>
2. #include <WebServer.h>
3. #include <ESPmDNS.h>
4.  
5. // Web server
6. WebServer server(80);
7.  
8. // HTTP handlers
9. void handleRoot() {
10.   server.send(200, "text/plain", "Hello from wESP32!\n");
11. }
12.  
13. void handleNotFound() {
14.   server.send(404, "text/plain", String("No ") + server.uri() + " here!\n");
15. }
16.  
17. void setup(){
18.   // Start the Ethernet, revision 7+ uses RTL8201
19.   ETH.begin(0, -1, 16, 17, ETH_PHY_RTL8201);
20.   // The defaults work for older revision boards
21.   // ETH.begin();
22.   // You can browse to wesp32demo.local with this
23.   MDNS.begin("wesp32demo");
24.  
25.   // Bind HTTP handler
26.   server.on("/", handleRoot);
27.   server.onNotFound(handleNotFound);
28.  
29.   // Start the Ethernet web server
30.   server.begin();
31.   // Add service to MDNS-SD
32.   MDNS.addService("http", "tcp", 80);
33. }
34.  
35. void loop(){
36.   server.handleClient();
37. }

GeSHi © Codebox Plus Extension

Any help to solve my issue is welcome.