Good afternoon,
I have a ESP32-S3-DevKitC-1 kit and the Eclipse version of ESP-IDF.
Some times ago, I managed to debug on this platform using Eclipse and I took some notes.
In my notes, I wrote that I had to execute ESP-IDF 5.0 CMD and then execute the command
openocd –f board/esp32s3-builtin.cfg.
However, after reinstalling Eclipse ESP-IDF on a new computer, I do not manage to execute the ESP-IDP 5.0 CMD anymore.
The file idf_cmd_init.bat is not in the C:\Espressif directory.
I tried to execute the Universal Online Installer 2.18 but the procedure is very long.
The process is stuck on a window saying "Please wait while setup installs ESP-IDF Tools on your computer".
I don't know how much time I have to wait but it seams to be very long.
Best regards,
Thomas TRUILHE<
I would like to debug using Eclipse ESP-IDF and a ESP32-S3-DevKitC-1
-
- Posts: 229
- Joined: Thu Jul 14, 2022 5:15 am
-
- Posts: 188
- Joined: Wed Jul 17, 2019 5:26 pm
Re: I would like to debug using Eclipse ESP-IDF and a ESP32-S3-DevKitC-1
Hello Thomas,
For some reason, if you're unable to install using an online installer(windows defender etc), please use Espressif-IDE 2.7.0 Windows offline installer
https://dl.espressif.com/dl/idf-install ... -4.4.3.exe
This will install esp-idf, esp-idf tools, espressif-ide and all the required plugins to get started.
Do let me know if you see any challenges with this.
Thanks!
For some reason, if you're unable to install using an online installer(windows defender etc), please use Espressif-IDE 2.7.0 Windows offline installer
https://dl.espressif.com/dl/idf-install ... -4.4.3.exe
This will install esp-idf, esp-idf tools, espressif-ide and all the required plugins to get started.
Do let me know if you see any challenges with this.
Thanks!
Who is online
Users browsing this forum: No registered users and 20 guests