感觉我的板子启动模式设置的有问题，应该怎么调？

[Mars.CN]

ES32-S3-DevKitC-1（D3N32R8V）的开发板，启动的时候输出

Code: Select all

ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0x18 (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
Octal Flash Mode Enabled
For OPI Flash, Use Default Flash Boot Mode
mode:SLOW_RD, clock div:1
load:0x3fcd0108,len:0xe34
load:0x403b6000,len:0x9e8
load:0x403ba000,len:0x2be4
entry 0x403b61d4
Performing initial setup
Traceback (most recent call last):
  File "_boot.py", line 11, in <module>
  File "inisetup.py", line 36, in setup
OSError: 28
MicroPython v1.18 on 2022-02-10; ESP32 module with ESP32
Type "help()" for more information.

多了两行信息
Octal Flash Mode Enabled
For OPI Flash, Use Default Flash Boot Mode
下面输出的mode是SLOW_RD

但我另一块 ESP32-S3-DevKitM-1的板子，使用同样的固件，启动后输出

Code: Select all

ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0x8 (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fcd0108,len:0xe34
load:0x403b6000,len:0x9e8
load:0x403ba000,len:0x2be4
entry 0x403b61d4
MicroPython v1.18 on 2022-02-16; ESP32 module with ESP32
Type "help()" for more information.

就没有那行输出，而且mode是DIO的
同一套编译好的固件，烧到不同板子里出现的结果不一样
打开了DEBUG模式，也没找到哪里出来问题。
谁能帮忙看看？