Thinking that it may be a resource or timing problem, I tried to run the temp code on one core and the wifi/relay code on the other core. It still crashes. I added the core code to the separate ino's and the temp code worked as expected but the wifi/relay code still crashed. The serial monitor displays the crash info, it says "Debug exception reason: Stack canary watchpoint triggered (Task1)" Below is the wifi/relay code that crashes. Any thought on how to get this to work in it's own core?
Thanks
JohnnyG
Code: Select all
#include "Arduino.h"
#include <WiFi.h>
TaskHandle_t Task1;
const char* ssid = "Chicago";
const char* password = "TerryKathRules";
WiFiServer server(80);
void setup()
{
Serial.begin(115200);
pinMode(23, OUTPUT); // set the LED pin mode
xTaskCreatePinnedToCore(
loop1, /* Function to implement the task Can be called anything */
"Task1", /* Name of the task */
1000, /* Stack size in words */
NULL, /* Task input parameter */
0, /* Priority of the task */
&Task1, /* Task handle. This is a pointer in memory that we can get to at any timne*/
1); /* Core where the task should run */
delay(10);
// We start by connecting to a WiFi network
Serial.println();
Serial.println();
Serial.print("Connecting to ");
Serial.println(ssid);
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED) {
delay(500);
Serial.print(".");
}
Serial.println("");
Serial.println("WiFi connected.");
Serial.println("IP address: ");
Serial.println(WiFi.localIP());
// server.begin();
}
int value = 0;
void loop1(void * parameter) {
for (;;) {
server.begin();
WiFiClient client = server.available(); // listen for incoming clients
if (client) { // if you get a client,
Serial.println("New Client."); // print a message out the serial port
String currentLine = ""; // make a String to hold incoming data from the client
while (client.connected()) { // loop while the client's connected
if (client.available()) { // if there's bytes to read from the client,
char c = client.read(); // read a byte, then
Serial.write(c); // print it out the serial monitor
if (c == '\n') { // if the byte is a newline character
// if the current line is blank, you got two newline characters in a row.
// that's the end of the client HTTP request, so send a response:
if (currentLine.length() == 0) {
// HTTP headers always start with a response code (e.g. HTTP/1.1 200 OK)
// and a content-type so the client knows what's coming, then a blank line:
client.println("HTTP/1.1 200 OK");
client.println("Content-type:text/html");
client.println();
client.println("<HTML>");
client.println("<HEAD>");
client.println("<TITLE>Arduino GET test page</TITLE>");
client.println("</HEAD>");
client.println("<BODY>");
client.println("<H1>Fan Switch</H1>");
client.print("<a href='\/L\' target='inlineframe'>ON </a>");
client.print("<a href='\/H\' target='inlineframe'>OFF</a>");
client.println("<IFRAME name=inlineframe style='display:none'>");
client.println("</IFRAME>");
client.println("</BODY>");
client.println("</HTML>");
// the content of the HTTP response follows the header:
// The HTTP response ends with another blank line:
client.println();
// break out of the while loop:
break;
} else { // if you got a newline, then clear currentLine:
currentLine = "";
}
} else if (c != '\r') { // if you got anything else but a carriage return character,
currentLine += c; // add it to the end of the currentLine
}
// Check to see if the client request was "GET /H" or "GET /L":
if (currentLine.endsWith("GET /H")) {
digitalWrite(23, HIGH); // GET /H turns the LED on
}
if (currentLine.endsWith("GET /L")) {
digitalWrite(23, LOW); // GET /L turns the LED off
}
}
}
// close the connection:
client.stop();
Serial.println("Client Disconnected.");
}
}
}
void loop() {
delay (1); // this is the way the guy with the swedish accent does it.
}