JTAG debugging guide for ESP32 with debugging example

[rudi ;-)]

hi guys,

thanks for the great work on it.

JTAG Debugging for ESP32
V 1.0
2017 March 1
PDF

This document provides a guide to installing OpenOCD for ESP32 and debugging using gdb in a Linux virtual machine.

it comes with a debugging example.

JTAG_debugging_ESP32_V1-0.jpg (109.05 KiB) Viewed 6418 times

please visit allways espressif ESP32 document resource for newer update or new guide's


best wishes
rudi

[imtiaz]

Hi ,

Is there an equivalent guide for windows ?

Thanks
imtiaz

[perryc]

Got a TIAO USB JTAG V2 board (http://www.diygadget.com/tiao-usb-multi ... erial.html) running using the Espressif's JTAG Debugging doc under x86_64 Linux.

Here's a few notes:

Install the linux FTDI driver http://www.ftdichip.com/Drivers/D2XX.htm
Do as described in ReadMe.txt but was unable to get a "sudo ./EEPROM/read/read" to work until building and installing the patch described here: http://www.tiaowiki.com/forums/index.ph ... l#msg11408

6 Connections needed: TUMPA JTAG<->WROOM32
1<->3.3v
4<->GND
5<->1012
7<->IO14
9<->IO13
13<->IO15