ESP32S Module AI Thinker - GPIO datalines

SirrCharles
Posts: 3
Joined: Sun Jun 04, 2017 4:39 am

ESP32S Module AI Thinker - GPIO datalines

Postby SirrCharles » Sun Jun 04, 2017 6:07 am

Hey guys,

I'm working on a board featuring the ESP32S module.

I found a eagle library from MarcoYau:
https://github.com/MacroYau/MacroYau-Eagle-Libraries

This library features the AI Thinker ESP32S module. Since the datasheet provides no warning about using pins like in the SD_CLK, SD_DATA and others, i'm wondering if i can use all GPIO pins on the module?

--------------------------------------------------------------------------------------------------------------
SoC ESP32 Datasheet ||October, 2016||
pins GPIO16, GPIO17, SD_CMD, SD_CLK, SD_DATA_0 and SD_DATA_1 are used for connecting embedded flash, and are not recommended for other uses.
https://www.espressif.com/sites/default ... eet_en.pdf

ESP-32 MODULE Datasheet ||October 3, 2016||
Provides no information.
http://www.es.co.th/Schemetic/PDF/ESP32.PDF

ESP-WROOM-32 Datasheet ||May 4, 2017||
Pins SCK/CLK, SDO/SD0, SDI/SD1, SHD/SD2, SWP/SD3 and SCS/CMD, namely, GPIO6 to GPIO11 are connected to the integrated SPI flash integrated on ESP-WROOM-32 and are not recommended for other uses.

https://www.espressif.com/sites/default ... eet_en.pdf
--------------------------------------------------------------------------------------------------------------
My small stepper driver has 7 pins that need to be controlled very vast in a PWM syle manner, but the codes provides the timing vs true PWM.:
A1
A2
PWMA
B1
B2
PWMB
STBY/SLEEP
--------------------------------------------------------------------------------------------------------------
Check my schematic:
http://i.imgur.com/QZuDL04.png
--------------------------------------------------------------------------------------------------------------
Question:

What Pins can be used on the ESP32S for driving my driver and what pins will Cause problems?

Is the ESP32S identical to the WROOM module?

Who is online

Users browsing this forum: No registered users and 62 guests