ESP32S3(FN8和FR8）分区表超过4MB upload后不断重启

[harold]

<r><B><s></s>开发环境vscode Platformio<e></e></B><br/>

<LIST><s>

• </s><LI>开发框架：arduino-esp32(version 2.0.3)</LI><e>

</e></LIST>
<LIST><s>

• </s><LI>使用芯片：ESP32 S3 FN8内置8MB FLASH 和ESP32 S3 FR8 外接8MB FLASH</LI><e>

</e></LIST> <br/>

<LIST><s>

• </s><LI>配置文件（platformio.ini)</LI><e>

</e></LIST>
<CODE><s>

Code: Select all

</s>[env:esp32s3]
platform = espressif32
board = esp32-s3-devkitc-1
framework = arduino
upload_port = COM3
monitor_speed = 115200
board_build.partitions = default_8MB.csv
build_flags = 
	-DBOARD_HAS_PSRAM
	-mfix-esp32-psram-cache-issue
	-DCORE_DEBUG_LEVEL=5
	-DCONFIG_ESPTOOLPY_FLASHSIZE="8MB"
	-DCONFIG_ESPTOOLPY_FLASHSIZE_8MB=1<e>

</e></CODE>

<LIST><s>

• </s><LI>下面分区表不断重启（default_8MB.csv）</LI><e>

</e></LIST>
<CODE><s>

Code: Select all

</s># Name,   Type, SubType, Offset,  Size, Flags
nvs,      data, nvs,     0x9000,  0x5000,
otadata,  data, ota,     0xe000,  0x2000,
app0,     app,  ota_0,   0x10000, 0x330000,
app1,     app,  ota_1,   0x340000,0x330000,
spiffs,   data, spiffs,  0x670000,0x190000,<e>

</e></CODE>

<LIST><s>

• </s><LI>下面分区表不会重启</LI><e>

</e></LIST>
<CODE><s>

Code: Select all

</s>Name,   Type, SubType, Offset,  Size, Flags
nvs,      data, nvs,     0x9000,  0x5000,
otadata,  data, ota,     0xe000,  0x2000,
app0,     app,  ota_0,   0x10000, 0x330000,
spiffs,   data, spiffs,  0x340000,0xc0000<e>

</e></CODE>

<LIST><s>

• </s><LI>重启错误输出信息</LI><e>

</e></LIST>
<CODE><s>

Code: Select all

</s>rst:0x3 (RTC_SW_SYS_RST),boot:0x8 (SPI_FAST_FLASH_BOOT)
Saved PC:0x403bb022
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fcd0108,len:0x78
load:0x403b6000,len:0x95c
load:0x403ba000,len:0x26f8
entry 0x403b61a8
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x3 (RTC_SW_SYS_RST),boot:0x8 (SPI_FAST_FLASH_BOOT)
Saved PC:0x403bb022
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fcd0108,len:0x78
load:0x403b6000,len:0x95c
load:0x403ba000,len:0x26f8
entry 0x403b61a8
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x3 (RTC_SW_SYS_RST),boot:0x8 (SPI_FAST_FLASH_BOOT)<e>

</e></CODE></r>