jtag 调试 esp32c3 出现问题开发板ESP32-C3-DevKitM-1

[flygmj920]

Open On-Chip Debugger v0.11.0-esp32-20211220 (2021-12-20-15:43)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
Info : esp_usb_jtag: VID set to 0x303a and PID to 0x1001
Info : esp_usb_jtag: capabilities descriptor set to 0x2000
Warn : Transport "jtag" was already selected
Flashing E:/gmj/mcu/esp/gmj_esp/gmj_base/build/partition_table/partition-table.bin at 0x8000
Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED
Info : esp_usb_jtag: Device found. Base speed 40000KHz, div range 1 to 255
Info : clock speed 40000 kHz
Info : JTAG tap: esp32c3.cpu tap/device found: 0x00005c25 (mfg: 0x612 (Espressif Systems), part: 0x0005, ver: 0x0)
Info : Examined RISC-V core; found 1 harts
Info : hart 0: XLEN=32, misa=0x40101104
Info : starting gdb server for esp32c3 on 3333
Info : Listening on port 3333 for gdb connections
Info : JTAG tap: esp32c3.cpu tap/device found: 0x00005c25 (mfg: 0x612 (Espressif Systems), part: 0x0005, ver: 0x0)
Info : [0] Found 8 triggers
Info : Flash mapping 0: 0x10020 -> 0x3c020020, 37 KB
Info : Flash mapping 1: 0x20020 -> 0x42000020, 109 KB
Info : Auto-detected flash bank 'esp32c3.flash' size 4096 KB
Info : Using flash bank 'esp32c3.flash' size 4096 KB
** Programming Started **
Info : PROF: Data transferred in 80.78 ms @ 49.5172 KB/s
** Programming Finished **
** Verify Started **
** Verified OK **
** Flashing done for partition_table/partition-table.bin **
Flashing E:/gmj/mcu/esp/gmj_esp/gmj_base/build/bootloader/bootloader.bin at 0x0
Info : JTAG tap: esp32c3.cpu tap/device found: 0x00005c25 (mfg: 0x612 (Espressif Systems), part: 0x0005, ver: 0x0)
** Programming Started **
Info : PROF: Data transferred in 313.177 ms @ 63.8617 KB/s
** Programming Finished **
** Verify Started **
** Verified OK **
** Flashing done for bootloader/bootloader.bin **
Flashing E:/gmj/mcu/esp/gmj_esp/gmj_base/build/gmj_base.bin at 0x10000
Info : JTAG tap: esp32c3.cpu tap/device found: 0x00005c25 (mfg: 0x612 (Espressif Systems), part: 0x0005, ver: 0x0)
** Programming Started **
Info : PROF: Data transferred in 9040.9 ms @ 70.347 KB/s
** Programming Finished **
** Verify Started **
** Verified OK **
** Flashing done for gmj_base.bin **
** Resetting Target **
Info : JTAG tap: esp32c3.cpu tap/device found: 0x00005c25 (mfg: 0x612 (Espressif Systems), part: 0x0005, ver: 0x0)
0
Started by GNU MCU Eclipse
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
Info : accepting 'gdb' connection on tcp/3333
Warn : No symbols for FreeRTOS!
Info : Flash mapping 0: 0x10020 -> 0x3c080020, 81 KB
Info : Flash mapping 1: 0x30020 -> 0x42000020, 478 KB
Info : Using flash bank 'esp32c3.irom' size 480 KB
Info : Flash mapping 0: 0x10020 -> 0x3c080020, 81 KB
Info : Flash mapping 1: 0x30020 -> 0x42000020, 478 KB
Info : Using flash bank 'esp32c3.drom' size 84 KB
Warn : Prefer GDB command "target extended-remote 3333" instead of "target remote 3333"
Info : JTAG tap: esp32c3.cpu tap/device found: 0x00005c25 (mfg: 0x612 (Espressif Systems), part: 0x0005, ver: 0x0)
Info : JTAG tap: esp32c3.cpu tap/device found: 0x00005c25 (mfg: 0x612 (Espressif Systems), part: 0x0005, ver: 0x0)
semihosting is enabled

Info : JTAG tap: esp32c3.cpu tap/device found: 0x00005c25 (mfg: 0x612 (Espressif Systems), part: 0x0005, ver: 0x0)
===== RISC-V Registers
(0) zero (/32)
(1) ra (/32)
(2) sp (/32)
(3) gp (/32)
(4) tp (/32)
(5) t0 (/32)
(6) t1 (/32)
(7) t2 (/32)
(8) fp (/32)
(9) s1 (/32)
(10) a0 (/32)
(11) a1 (/32)
(12) a2 (/32)
(13) a3 (/32)
(14) a4 (/32)
(15) a5 (/32)
(16) a6 (/32)
(17) a7 (/32)
(18) s2 (/32)
(19) s3 (/32)
(20) s4 (/32)
(21) s5 (/32)
(22) s6 (/32)
(23) s7 (/32)
(24) s8 (/32)
(25) s9 (/32)
(26) s10 (/32)
(27) s11 (/32)
(28) t3 (/32)
(29) t4 (/32)
(30) t5 (/32)
(31) t6 (/32)
(32) pc (/32)
(65) ustatus (/32)
(130) uepc (/32)
(131) ucause (/32)
(833) mstatus (/32)
(834) misa (/32)
(838) mtvec (/32)
(897) mscratch (/32)
(898) mepc (/32)
(899) mcause (/32)
(900) mtval (/32)
(993) pmpcfg0 (/32)
(994) pmpcfg1 (/32)
(995) pmpcfg2 (/32)
(996) pmpcfg3 (/32)
(1009) pmpaddr0 (/32)
(1010) pmpaddr1 (/32)
(1011) pmpaddr2 (/32)
(1012) pmpaddr3 (/32)
(1013) pmpaddr4 (/32)
(1014) pmpaddr5 (/32)
(1015) pmpaddr6 (/32)
(1016) pmpaddr7 (/32)
(1017) pmpaddr8 (/32)
(1018) pmpaddr9 (/32)
(1019) pmpaddr10 (/32)
(1020) pmpaddr11 (/32)
(1021) pmpaddr12 (/32)
(1022) pmpaddr13 (/32)
(1023) pmpaddr14 (/32)
(1024) pmpaddr15 (/32)
(2017) tselect (/32)
(2018) tdata1 (/32)
(2019) tdata2 (/32)
(2033) dcsr (/32)
(2034) dpc (/32)
(2035) dscratch0 (/32)
(2036) dscratch1 (/32)
(4161) priv (/8)

Error: libusb_bulk_write error: LIBUSB_ERROR_PIPE
Error: libusb_open() failed with LIBUSB_ERROR_ACCESS
Error: libusb_open() failed with LIBUSB_ERROR_ACCESS
Error: libusb_open() failed with LIBUSB_ERROR_ACCESS
Error: libusb_open() failed with LIBUSB_ERROR_ACCESS
Error: libusb_open() failed with LIBUSB_ERROR_ACCESS
Error: libusb_open() failed with LIBUSB_ERROR_ACCESS
Error: esp_usb_jtag: device not found!
Error: esp_usb_jtag: failed to revive USB device!
Error: missing data from bitq interface
Error: dmi_scan failed jtag scan
Error: failed read at 0x11, status=2
Error: libusb_bulk_write error: LIBUSB_ERROR_TIMEOUT
Error: libusb_open() failed with LIBUSB_ERROR_ACCESS
Error: libusb_open() failed with LIBUSB_ERROR_ACCESS
Error: libusb_open() failed with LIBUSB_ERROR_ACCESS
Error: libusb_open() failed with LIBUSB_ERROR_ACCESS
Error: libusb_open() failed with LIBUSB_ERROR_ACCESS
Error: libusb_open() failed with LIBUSB_ERROR_ACCESS
Error: esp_usb_jtag: device not found!