ESP32 Serial2 Uart TX pin problem

[vishal.borle]

Hello to all,

#define RX2_PIN 25
#define TX2_PIN 26

I have declair Serial2.begin(9600, SERIAL_8N1, RX2_PIN, TX2_PIN); and need to disable UART 2. For this used Serial2.end();

After that but TX2_PIN not working as input. Is any configuration need to be done when disabled UART2 for working RX and TX pin as normally input.

Please help me.

[rodmcm]

If you are going back to using 25 and 26 as inputs then you probably need to assign them with pinmode(25,INPUT_PULLUP) or similar