TWAI : Not working for speed above 100K

[swapnilnagriakr]

Hi, I am tryin to communicate over the CAN bus using TWAI Network example.
My setup has 2 ESP32 WROOM-32D board and 2 SN65HVD230 CAN transreceiver.
ESP32 1 is configured as Master and ESP32 2 is configured as Slave.

The Communication works fine when I configure TWAI drivers for 25K, 50K and 100K.
The communication stops working when I configure TWAI drivers above 100K(125K, 250K ...) speed.

Any idea what could be the issue?