Hi , can anyone say , how to configure the digital input and output in esp32 and how to read the digital input..?

[Reeshma]

My objective is , when am pressed the button , the led should glow , and when am released the button , the led should turn off.
am a beginner to this platform , please anyone can help me for the above problem

[ESP_krzychb]

Hi Reeshma,

I suggest the following:

1. Install Arduino IDE
2. Get blink.ino example working.
3. Get another example (that shows how to read digital input) working.

At this point you should be able to write a program doing what you described.

[ESP_krzychb]

Many would prefer to avoid arduino IDE.

@dotthree, Instead of Arduino IDE you can use esp-idf and program in plain C and/or C++.

I personally would really love to see a comprehensive GPIO example which shows multiple pins set up and working simultaneously.

Esp-idf provides example with four GIPO pins set up and working simultaneously.

[Reeshma]

Thank you, i will try with the above suggestion.

[ESP_Kewal]

What exactly is your requirement ? I suggest you to go through basics of freeRTOS : Task, Queue, Semaphore. They would help you understand examples in esp-idf better. Also go through the readme files in each example folder.