求助 ESP-32烧录时出现了fatal error

[hiyori1128]

a fatal error

error.png (82.9 KiB) Viewed 6544 times

板子是ESP32-LyraTD-MSC_A V2.2
求大佬帮助

[ESP_morris]

检查一下是不是用错了COM口？

[Baotong]

不知问题解决了没有？
我遇到了类似的问题：
我用的是ESP-WROVER-KIT V4.1板， ESP-IDF v4.2里的examples\get-started\blink.
在Device managermanager里显示COM3和COM4， 用idf.py -p COM3 -b 115200 flash 和idf.py -p COM4 -b 115200 flash命令烧录都失败。
--------------------------------------------------------------------------------------------------------------------------------------------------
C:\Users\x'xxx\Desktop\esp-idf\examples\get-started\blink>idf.py -p COM3 -b 115200 flash
Executing action: flash
Running ninja in directory c:\users\tong.bao\desktop\esp-idf\examples\get-started\blink\build
Executing "ninja flash"...
[1/4] Performing build step for 'bootloader'
ninja: no work to do.
[1/2] cmd.exe /C "cd /D C:\Users\Tong.Bao\Desktop\esp-idf\...o/Desktop/esp-idf/components/esptool_py/run_esptool.cmake"
esptool.py --chip esp32 -p COM3 -b 115200 --before=default_reset --after=hard_reset write_flash --flash_mode dio --flash_freq 40m --flash_size 2MB 0x8000 partition_table/partition-table.bin 0x1000 bootloader/bootloader.bin 0x10000 blink.bin
esptool.py v3.0
Serial port COM3
Connecting........_____....._____....._____....._____....._____....._____....._____

A fatal error occurred: Failed to connect to ESP32: Timed out waiting for packet header
CMake Error at run_cmd.cmake:14 (message):
esptool.py failed
Call Stack (most recent call first):
run_esptool.cmake:21 (include)


FAILED: CMakeFiles/flash
cmd.exe /C "cd /D C:\Users\Tong.Bao\Desktop\esp-idf\components\esptool_py && C:\Users\Tong.Bao\.espressif\tools\cmake\3.16.4\bin\cmake.exe -D IDF_PATH="C:/Users/Tong.Bao/Desktop/esp-idf" -D ESPTOOLPY="C:\Users\Tong.Bao\.espressif\python_env\idf4.2_py3.8_env\Scripts\python.exe C:/Users/Tong.Bao/Desktop/esp-idf/components/esptool_py/esptool/esptool.py --chip esp32" -D ESPTOOL_ARGS="--before=default_reset --after=hard_reset write_flash @flash_args" -D WORKING_DIRECTORY="C:/Users/Tong.Bao/Desktop/esp-idf/examples/get-started/blink/build" -P C:/Users/Tong.Bao/Desktop/esp-idf/components/esptool_py/run_esptool.cmake"
ninja: build stopped: subcommand failed.
ninja failed with exit code 1
----------------------------------------------------------------------------------------------------------------------------------------------------

[ESP_Gargamel]

log 看上去是串口没通。

1、你先用串口调试助手之类的打开 COM3 或 COM4，波特率 115200，reset 开发板，看是否有正常 log 输出；
2、你看下你的 ESP-WROVER-KIT，JP2 上 RXD/TXD 有没有跳上？https://docs.espressif.com/projects/esp ... up-options