which external flash can i use for replacing internal flash

User avatar
Partokus
Posts: 9
Joined: Sat Feb 01, 2020 1:30 pm

which external flash can i use for replacing internal flash

Postby Partokus » Sat Feb 01, 2020 1:59 pm

Sorry for english and i am not very good in esp32.

I use ESP-32 WROVER-B 16MB

I want to use micro sd card as main memory and will connect paralelly with internal flash besides CS pin what give me set new flash instead internal. I have yet two questions.
1) What the maximum size of micro sd card can be?
2) I know i must reconfigure EFUSes all pins of SPI Bus and specially CS pin but what i to do else for my porpose?

ESP_Sprite
Posts: 9769
Joined: Thu Nov 26, 2015 4:08 am

Re: which external flash can i use for replacing internal flash

Postby ESP_Sprite » Sat Feb 01, 2020 4:56 pm

Let me stop you here:
I want to use micro sd card as main memory
If you mean 'instead of the internal SPI flash', that's not possible, period.

User avatar
Partokus
Posts: 9
Joined: Sat Feb 01, 2020 1:30 pm

Re: which external flash can i use for replacing internal flash

Postby Partokus » Mon Feb 03, 2020 11:19 am

ESP_Sprite wrote:
Sat Feb 01, 2020 4:56 pm
If you mean 'instead of the internal SPI flash', that's not possible, period.
thank you for reply :D i just got that idea because i think micro sd card has flash memory and have SPI interface as internal SPI flash memory has... Tell me please why it is not possible?

ESP_Sprite
Posts: 9769
Joined: Thu Nov 26, 2015 4:08 am

Re: which external flash can i use for replacing internal flash

Postby ESP_Sprite » Mon Feb 03, 2020 3:42 pm

Because while both can be accessed over SPI, the higher interface to a SPI flash memory chip (so the commands, bitfields, general way the interface works) is entirely different from the SPI mode of an SD card. The hardware that is used inside the ESP32 to access it is only capable of speaking the protocol of SPI flash chips.

User avatar
Partokus
Posts: 9
Joined: Sat Feb 01, 2020 1:30 pm

Re: which external flash can i use for replacing internal flash

Postby Partokus » Fri Feb 07, 2020 1:30 pm

ESP_Sprite wrote:
Mon Feb 03, 2020 3:42 pm
Thank you! Anyway i refused that idea by reason that i don't need sd card for mobile programming esp32 because i got knowledge about OTA programming! esp32 can programming through Wi-Fi it is awesome

PeterR
Posts: 621
Joined: Mon Jun 04, 2018 2:47 pm

Re: which external flash can i use for replacing internal flash

Postby PeterR » Sat Feb 15, 2020 11:59 pm

Although you could load programs from SD into IRAM and then execute.
I think Sprite is saying that the ESP32 extended memory capabilities (e.g. automatic cached flash execution) cannot be tied to an SD card.
If you're program fits in IRAM then you could load IRAM from SD. If not then maybe you can come up with a manual cache strategy. Latter is a bed of nails though. Adding external FLASH (as an ESP package option) is a lot cheaper than an SD card. Keep in mind that you may struggle to write to internal FLASH whilst your program runs in real time.
& I also believe that IDF CAN should be fixed.

Who is online

Users browsing this forum: Google [Bot] and 78 guests