New Chip ESP32-S2

[mikemoy]

I hope there'll be a new one with ethernet plus PHY and maybe a POE PD controller (the lack of those takes away some of the advantages of a small esp32, by the time they are added you have a big board like PI's ad such). IoT for buildings isn't safe/reliable when it's all exposed on wireless the users can get at, sure for a couple of home devices.

It's still very small even with POE.

WIN_20190815_10_17_54_Pro.jpg (147.2 KiB) Viewed 10503 times

[WiFive]

Datasheet hints that it still has CAN

[rudi ;-)]

Datasheet hints that it still has CAN

WiFive, do you mean

QFDM Modem.png (49.89 KiB) Viewed 10359 times

OFDM PDF

WiKipedia


best wishes
rudi

[WiFive]

123 can_rx 1 no can_tx 1’d1
124 - - - can_bus_off_on 1’d1
125 - - - can_clkout 1’d1

[rudi ;-)]

taken from datasheet:

S.12 ( Note )

..
2.ESP32-S2’s pins SPICS1, SPIHD, SPIWP, SPICS0, SPICLK, SPIQ and SPID are usually
used for connecting the embedded flash and SRAM, and are not recommended for other uses.
..


there are plan's to get an ESP32-S2 with eMbeddedFlash i read out

from 2.1.3
..up to 1 GB of external flash and SRAM can be supported.

i think there must someone edit this line , it reads SRAM up to 1GB can be supported?
really? ( i am thinking 128MB )

ups...



123 can_rx 1 no can_tx 1’d1

CAN.jpg (33.56 KiB) Viewed 10458 times

we got ESP32-S2 CAN?
mistake or CAN transceiver ? CAN Controller ?

best wishes
rudi

edit:
did not read your post ( had open the datasheet for read and put things to these post )
i think we have CAN transceiver then - perhabs controller .. or bad - mistake ?

[rudi ;-)]

BLE ? BT ?

203 pcmfsync_in 0 no bt_audio0_irq 1’d1
204 pcmclk_in 0 no bt_audio1_irq 1’d1
205 pcmdin 0 no bt_audio2_irq 1’d1
206 rw_wakeup_req 0 no ble_audio0_irq 1’d1
207 - - - ble_audio1_irq 1’d1
208 - - - ble_audio2_irq 1’d1
209 - - - pcmfsync_out pcmfsync_en
210 - - - pcmclk_out pcmclk_en
211 - - - pcmdout pcmdout_en
212 - - - ble_audio_sync0_p 1’d1
213 - - - ble_audio_sync1_p 1’d1
214 - - - ble_audio_sync2_p 1’d1

wait for the revision

..
best wishes
rudi

[rudi ;-)]

123 can_rx 1 no can_tx 1’d1
124 - - - can_bus_off_on 1’d1
125 - - - can_clkout 1’d1

yes!

( or old/standard code leftovers )



best wishes
rudi

[WiFive]

yes!

No
https://github.com/espressif/esp-idf/bl ... /soc/soc.h

Let's try to keep the thread clean of guessing.

OFDM modem is just part of wifi.

[rudi ;-)]

yes!

No
https://github.com/espressif/esp-idf/bl ... /soc/soc.h

Let's try to keep the thread clean of guessing.

OFDM modem is just part of wifi.

actually were in the ESP32S2 (LX7) future repo
even the ESP32 (LX6) soc header, he grabbed.

the over-zealous made blind and
he reached for the stars too fast
and then he moved lonely ..

QFDM / OFDM
therefore, both thought trains posted
i hoped so. hope dies at last.
( SDR example )

ok approval -

best wishes
rudi

[rudi ;-)]

hi folks

spotted in the 'drumroll' scene:

the 56 pin ESP32-S2

esp32s2_board_4096x4096.jpg (218.79 KiB) Viewed 10133 times

best wishes
rudi