Schematics of Espressif ESP32 dev boards & modules

[ESP_Angus]

Electrical schematic PDFs for development boards & modules designed by Espressif:

Note: This list is no longer updated. Latest reference designs can be downloaded from http://espressif.com/en/support/download/documents

Previously Published Development Boards

• Core Board V2 (aka DevKitC)
• ESP-WROVER-KIT V3 (former DevKitJ)
• ESP32 Demo Board V2

Modules

• ESP-WROOM-32 module

Older Development Boards

• ESP-WROVER-KIT V2 (aka DevKitJ)
• ESP-WROVER-KIT V1 (aka DevKitJ)

The IDF hardware reference documentation also contains links to these schematics:
http://esp-idf.readthedocs.io/en/latest ... index.html

To ask a question about a particular board or module, please start a new thread.

[a2retro]

@ESP_Angus Thanks!

[ESP_Angus]

First post is updated with a link to the ESP32 Demo Board V2 schematic.

[ESP_krzychb]

Hi ESP_Angus,
Could you post schematic of ESP-WROVER-KIT V2 (black)?

[ESP_Angus]

Thanks for the reminder krzychb. Done (link in first post.)

[michmich]

Where can we find a bill of materials (BOM) for some of these boards like the DevKitC? I can see things like S8050 and NCP1117 which are too vague to properly source.

Even worse, I have no idea what a ESD05V88D-LC is, the package size, or which manufacturer makes them.

There is a bill of materials for the ESP32-WROOM-32 module, in the ESP32 Module Reference Design. Unfortunately, no such design documents exist for the DevKitC.

How can I figure out which components to order, if I want to reproduce the DevKitC design by myself?

[michmich]

Line 10 of the bill of materials [1] for the DevKitC specifies 'ESD05V88D-LC，0402' which is not listed on Arrow, Mouser, or DigiKey. It appears it is a 'ESD Suppressor' for USB 5V rails. Which of these parts would be an appropriate replacement?

SD05-7 [2]
SD05-01FTG [3]
SD05-TCT [4]

Unfortunately none of them are 0402 sized, but I'm more worried whether they functionally match the 'ESD05V88D.'

[1] http://www.espressif.com/en/support/dow ... nce+Design
[2] https://www.arrow.com/en/products/sd05- ... orporated/
[3] https://www.arrow.com/en/products/sd05- ... ittelfuse/
[4] https://www.arrow.com/en/products/sd05.tct/semtech/

[WiFive]

Check the datasheet and the datasheet/notes of the device it is protecting (cp2102).

[Espressif_Kelly]

Hi,

Below are three kinds of ESD protection diode that can be as a replacement.

https://www.arrow.com/en/products/esd9b ... iconductor

https://www.arrow.com/en/products/esd9m ... iconductor

https://www.arrow.com/en/products/esd9d ... iconductor

[santanapablo1975]

Hi Angus,

I would like to ask for the WROVER module schematic... I would like to see the connections for the SPI FLASH and external PSRAM, would you mnd to post it? the new one with 2 columms distribution!

Regards

Thanks

Juan