新买的模组ESP32-C3-MINI-1-N4程序下载不了，但是VSCode监视器有输出

[WXhui1111]

刚买的模组，画了个pcb板子焊上去了，焊了三个板子结果都一样，板子上写着ESP32-C3-MINI-1,左下角写着M4N4,
程序不能下载，监视器输出如下：
Download boot modes disabled
ESP-ROM:esp32c3-api1-20210207
Build:Feb 7 2021
rst:0x3 (RTC_SW_SYS_RST),boot:0x5 (DOWNLOAD(USB/UART0/1))
Saved PC:0x40048b82
0x40048b82: ets_secure_boot_verify_bootloader_with_keys in ROM

Download boot modes disabled
ESP-ROM:esp32c3-api1-20210207
Build:Feb 7 2021
rst:0x3 (RTC_SW_SYS_RST),boot:0x5 (DOWNLOAD(USB/UART0/1))
Saved PC:0x40048b82
0x40048b82: ets_secure_boot_verify_bootloader_with_keys in ROM
循环输出上面的内容，
下载时Connecting.......................，一直连接不上，下载后报错
A fatal error occurred: Failed to connect to ESP32-C3: Wrong boot mode detected (0x5)! The chip needs to be in download mode.
For troubleshooting steps visit: https://docs.espressif.com/projects/esp ... oting.html
有没有大佬能指点一下,十分感谢

[WXhui1111]

解决了，封装代码为M4N4，这个好像是定制的，出厂禁用了下载模式，换成XXN4