esp32S3 flash download tool 地址得相关问题

[andylu321]

模组型号: ESP32-S3-WROOM-1-N8R8


我的问题是 通过arduinoIDE 32 S3的编译信息 得到了 bootloader.bin 地址 0x8000 ; partitions.bin 0xe000 ;boot_app0.bin 0x10000;
但是我找不到order_T.ino.bin 对应的地址.

我尝试了.0x10000 0x000 都不行,下载到芯片里面,一直重启.

重启信息

[10:44:50.197]收←◆ets_loader.c 78
[10:44:50.536]收←◆ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x10 (RTCWDT_RTC_RST),boot:0x8 (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3c020020,
[10:44:50.554]收←◆len:0xb1c0
[10:44:50.570]收←◆ets_loader.c 78



:\Users\ADMINI~1\AppData\Local\Temp\arduino_build_49009/order_T.ino.bootloader.bin 0x8000 C:\Users\ADMINI~1\AppData\Local\Temp\arduino_build_49009/order_T.ino.partitions.bin 0xe000 C:\Users\Administrator\AppData\Local\Arduino15\packages\esp32\hardware\esp32\2.0.4/tools/partitions/boot_app0.bin 0x10000 C:\Users\ADMINI~1\AppData\Local\Temp\arduino_build_49009/order_T.ino.bin


以下是 这个是arduinoIDE 32 S3的编译信息

"C:\\Users\\Administrator\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\2.0.4/tools/gen_esp32part.exe" -q "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\arduino_build_49009/partitions.csv" "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\arduino_build_49009/order_T.ino.partitions.bin"
使用 1.2.0 版本的库 ArduinoUniqueID 在文件夹： D:\Arduino\libraries\ArduinoUniqueID
"C:\\Users\\Administrator\\AppData\\Local\\Arduino15\\packages\\esp32\\tools\\xtensa-esp32s3-elf-gcc\\gcc8_4_0-esp-2021r2-patch3/bin/xtensa-esp32s3-elf-size" -A "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\arduino_build_49009/order_T.ino.elf"
项目使用了 237029 字节，占用了 (7%) 程序存储空间。最大为 3342336 字节。
全局变量使用了13244字节，(4%)的动态内存，余留314436字节局部变量。最大为327680字节。
C:\Users\Administrator\AppData\Local\Arduino15\packages\esp32\tools\esptool_py\3.3.0/esptool.exe --chip esp32s3 --port COM33 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 8MB 0x0 C:\Users\ADMINI~1\AppData\Local\Temp\arduino_build_49009/order_T.ino.bootloader.bin 0x8000 C:\Users\ADMINI~1\AppData\Local\Temp\arduino_build_49009/order_T.ino.partitions.bin 0xe000 C:\Users\Administrator\AppData\Local\Arduino15\packages\esp32\hardware\esp32\2.0.4/tools/partitions/boot_app0.bin 0x10000 C:\Users\ADMINI~1\AppData\Local\Temp\arduino_build_49009/order_T.ino.bin
esptool.py v3.3
Serial port COM33
Connecting....
Chip is ESP32-S3
Features: WiFi, BLE
Crystal is 40MHz
MAC: 7c:df:a1:e9:a6:1c
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 921600
Changed.
Configuring flash size...
Flash will be erased from 0x00000000 to 0x00003fff...
Flash will be erased from 0x00008000 to 0x00008fff...
Flash will be erased from 0x0000e000 to 0x0000ffff...
Flash will be erased from 0x00010000 to 0x00049fff...
Flash params set to 0x023f
Compressed 15008 bytes to 10328...
Writing at 0x00000000... (100 %)
Wrote 15008 bytes (10328 compressed) at 0x00000000 in 0.4 seconds (effective 279.6 kbit/s)...
Hash of data verified.
Compressed

[cwx133]