ESP-IDF CST816S touch panel gesture's

[AdamZh08]

Hello, i have a problem with adding gesture recognition in my code so could someone help me to add it? Also as i know CST816S should already transfer gesture types(it is so with arduino library) but in esp-idf component there are no functions that gives me them. So wether help me to add it in my code or modify component please. Thank you!

Code: [Select all] [Expand/Collapse]

1.  

GeSHi © Codebox Plus Extension

Code: Select all

#include <string.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/semphr.h"

#include "esp_log.h"
#include "nvs_flash.h"
#include "sdkconfig.h"
#include "audio_element.h"
#include "audio_pipeline.h"
#include "audio_event_iface.h"
#include "audio_common.h"
#include "fatfs_stream.h"
#include "i2s_stream.h"
#include "mp3_decoder.h"
#include "esp_peripherals.h"
#include "periph_sdcard.h"
#include "board.h"

#include "esp_lcd_touch.h"
#include "esp_lcd_touch_cst816s.h"

static const char *TAG = "PLAY_SDCARD_MUSIC";

static SemaphoreHandle_t touch_mux;

esp_lcd_panel_io_handle_t tp_io_handle = NULL;

esp_lcd_panel_io_i2c_config_t tp_io_config = ESP_LCD_TOUCH_IO_I2C_CST816S_CONFIG();

uint16_t touch_x[1];
uint16_t touch_y[1];
uint16_t touch_strength[1];
uint8_t touch_cnt = 0;

static void touch_callback(esp_lcd_touch_handle_t tp)
{
    BaseType_t xHigherPriorityTaskWoken = pdFALSE;
    xSemaphoreGiveFromISR(touch_mux, &xHigherPriorityTaskWoken);

    if (xHigherPriorityTaskWoken) {
        portYIELD_FROM_ISR();
    }
}

void app_main(void)
{
    touch_mux = xSemaphoreCreateBinary();

    esp_lcd_touch_handle_t tp = NULL;
    esp_lcd_panel_io_handle_t tp_io_handle = NULL;

    const i2c_config_t i2c_conf = {
        .mode = I2C_MODE_MASTER,
        .sda_io_num = GPIO_NUM_6,
        .scl_io_num = GPIO_NUM_7,
        .sda_pullup_en = GPIO_PULLUP_ENABLE,
        .scl_pullup_en = GPIO_PULLUP_ENABLE,
        .master.clk_speed = 400000,
    };
    ESP_LOGI(TAG,"Initializing I2C for display touch");
    /* Initialize I2C */
    ESP_ERROR_CHECK(i2c_param_config(I2C_NUM_0, &i2c_conf));
    ESP_ERROR_CHECK(i2c_driver_install(I2C_NUM_0, i2c_conf.mode, 0, 0, 0));

    
    esp_lcd_panel_io_i2c_config_t tp_io_config = ESP_LCD_TOUCH_IO_I2C_CST816S_CONFIG();

    ESP_LOGI(TAG,"esp_lcd_new_panel_io_i2c");
    ESP_ERROR_CHECK(esp_lcd_new_panel_io_i2c((esp_lcd_i2c_bus_handle_t)I2C_NUM_0, &tp_io_config, &tp_io_handle));

    esp_lcd_touch_config_t tp_cfg = {
        .x_max = 240,
        .y_max = 240,
        .rst_gpio_num = 13,
        .int_gpio_num = 5,
        .levels = {
            .reset = 0,
            .interrupt = 0,
        },
        .flags = {
            .swap_xy = 0,
            .mirror_x = 1,
            .mirror_y = 0,
        },
        .interrupt_callback = touch_callback,
    };

    esp_lcd_touch_new_i2c_cst816s(tp_io_handle, &tp_cfg, &tp);

    while(1) {
        if (xSemaphoreTake(touch_mux, 10) == pdTRUE) {
            esp_lcd_touch_read_data(tp); // read only when ISR was triggled

            bool touchpad_pressed = esp_lcd_touch_get_coordinates(tp, touch_x, touch_y, touch_strength, &touch_cnt, 1);

            //gesture recognition
        }
    }
}