TG0_WDT_HPSYS error in ESP32C6

[Vineethad]

Hello Everyone,

I am working with ESP32C6 module. The module was not detecting in device manager but in Tera Term it was showing error like below mentioned file. Can you please clarify why I am getting this error and how to solve.

Thanks & Regards,
D.Vineetha.

[ESP_Sprite]

There's nothing in the flash. Try forcing it into download mode by grounding GPIO9 and resetting the chip.

[Vineethad]

Thanks for the response,



"There's nothing in the flash"
Because, I am using new esp32c6 chip. Another chip with same hardware functionality was working fine. I am unable to understand why it is showing "invalid header". Kindly help me to solve this problem.



Thanks & Regards,
D.Vineetha.

[ESP_Sprite]

Try forcing it into download mode by grounding GPIO9 and resetting the chip.

[Vineethad]

Thanks for the reply,

Sorry for the delay. Still getting the same error.

Thanks & Regards,
D. Vineetha.

[ESP_Sprite]

That's not possible, if you put the chip into download mode you should get a different message than the screenshot you posted.

Let's back up a bit:
- What do you want to do with this chip? Flash your own firmware to it (if so, what SDK), use it with AT firmware, ...?
- What *exactly* have you tried already to do this?
- What is your hardware like? Are you using a devboard, or a module on a custom PCB?