Hello from France

[jclaudej]

I am a new user of ESP32 and I need your help to understand this fantastic product

Sorry for my English language who isn't perfect and top of taht my 68 years aren't an advantage

I have some experience with industrial automation but you can considere that I am a newbies

I had already used Arduino Uno and my inteerest for ESP32 is the communication WiFi.

My firts question is about version of my ESP32 (normaly Expressif) =>
https://www.amazon.fr/dp/B0B4DPKJTQ?ref ... tails&th=1

I don't find if it's C2, C3 ... ?

Seconde question about the message of serial communication IDE Arduino :

• 14:26:43.567 ->
  14:26:43.567 -> rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
  14:26:43.567 -> configsip: 0, SPIWP:0xee
  14:26:43.567 -> clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
  14:26:43.567 -> mode:DIO, clock div:1
  14:26:43.567 -> load:0x3fff0030,len:1344
  14:26:43.567 -> load:0x40078000,len:13964
  14:26:43.567 -> load:0x40080400,len:3600
  14:26:43.717 -> entry 0x400805f0
  14:26:43.843 -> E (179) psram: PSRAM ID read error: 0xffffffff
  14:26:46.076 -> Connecting to WiFi
  14:26:46.076 -> ....
  14:26:50.078 -> WiFi connecté
  14:26:50.078 -> 192.168.1.2 : 192.168.1.198

What's this read error ?

I hope your understanding and your help.

jclaudej

[ESP_Sprite]

Sorry for my English language who isn't perfect and top of taht my 68 years aren't an advantage

No worries, your English is better than my French

My firts question is about version of my ESP32 (normaly Expressif) =>
https://www.amazon.fr/dp/B0B4DPKJTQ?ref ... tails&th=1

I don't find if it's C2, C3 ... ?

That board has a (clone of an) ESP-Wroom-32 on board, which contains the 'classic' ESP32.

14:26:43.843 -> E (179) psram: PSRAM ID read error: 0xffffffff
What's this read error ?

ESP32 chips can have external PSRAM attached, which enables you to use more memory than the 500'ish K of internal RAM. Your module does not have that, and the read error is the Arduino environment trying to probe that chip. You can ignore it.

[jclaudej]

Thank a lot for your help but I need your help beacause when I try to load the following program inside my esp32

Code: Select all

esphome:
  name: esphome-web-e36494
  friendly_name: ESPHome Web e36494

esp32:
  board: esp32dev
  framework:
    type: arduino

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "souR3/tpme3dh3z4Dg5hsQy476J1kxf+U0jCPpXLg6Y="

ota:


wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Esphome-Web-E36494"
    password: "mg4kfyu9qmtC"

captive_portal:

web_server :
  port: 80

  # Example configuration entry
dallas:
  - pin: GPIO14

# Individual sensors
sensor:
  - platform: dallas
    address: 0x1C0000031EDD2A28
    name: "Temperature Piscine"
    

I get the following message :

Code: Select all

NFO ESPHome 2023.11.6
INFO Reading configuration /config/esphome/esphome-web-e36494.yaml...
INFO Generating C++ source...
INFO Compiling app...
Processing esphome-web-e36494 (board: esp32dev; framework: arduino; platform: platformio/espressif32@5.4.0)
--------------------------------------------------------------------------------
HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash
 - toolchain-xtensa-esp32 @ 8.4.0+2021r2-patch5
Dependency Graph
|-- AsyncTCP-esphome @ 2.0.1
|-- WiFi @ 2.0.0
|-- FS @ 2.0.0
|-- Update @ 2.0.0
|-- ESPAsyncWebServer-esphome @ 3.1.0
|-- DNSServer @ 2.0.0
|-- ESPmDNS @ 2.0.0
|-- noise-c @ 0.1.4
|-- ArduinoJson @ 6.18.5
Compiling .pioenvs/esphome-web-e36494/src/esphome/components/api/api_connection.cpp.o
sh: 1: xtensa-esp32-elf-g++: Permission denied
*** [.pioenvs/esphome-web-e36494/src/esphome/components/api/api_connection.cpp.o] Error 127
Compiling .pioenvs/esphome-web-e36494/src/esphome/components/api/api_frame_helper.cpp.o
sh: 1: xtensa-esp32-elf-g++: Permission denied
*** [.pioenvs/esphome-web-e36494/src/esphome/components/api/api_frame_helper.cpp.o] Error 127
========================== [FAILED] Took 4.54 seconds ==========================

Do you have an idea about this problem ?

[ESP_Sprite]

Sorry, I have no experience with esphome.