monitor log:
Code: Select all
bumanuu@bumanuux:/media/2TB/DATA/DEV/cdc_acm_vcp$ export IDF_PATH=/home/bumanuu/DEV/GIT/esp-idf
/home/bumanuu/.espressif/python_env/idf5.2_py3.10_enbumanuu@bumanuux:/media/2TB/DATA/DEV/cdc_acm_vcp$ /home/bumanuu/.espressif/python_env/idf5.2_py3.10_env/bin/python /home/bumanuu/DEV/GIT/esp-idf/tools/idf_monitor.py -p /dev/ttyACM0 -b 115200 --toolchain-prefix xtensa-esp32s3-elf- --target esp32s3 /media/2TB/DATA/DEV/cdc_acm_vcp/build/cdc_acm_vcp.elf
--- idf_monitor on /dev/ttyACM0 115200 ---
--- Quit: Ctrl+] | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H ---
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0x8 (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce3820,len:0x1718
load:0x403c9700,len:0x4
load:0x403c9704,len:0xc08
load:0x403cc700,len:0x2f20
entry 0x403c990c
I (27) boot: ESP-IDF v5.2-dev-1890-g28167ea5a3-dirty 2nd stage bootloader
I (27) boot: compile time Sep 7 2023 15:15:46
I (28) boot: Multicore bootloader
I (32) boot: chip revision: v0.1
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (41) boot.esp32s3: SPI Mode : DIO
I (45) boot.esp32s3: SPI Flash Size : 2MB
I (50) boot: Enabling RNG early entropy source...
I (56) boot: Partition Table:
I (59) boot: ## Label Usage Type ST Offset Length
I (66) boot: 0 nvs WiFi data 01 02 00009000 00006000
I (74) boot: 1 phy_init RF data 01 01 0000f000 00001000
I (81) boot: 2 factory factory app 00 00 00010000 00100000
I (89) boot: End of partition table
I (93) esp_image: segment 0: paddr=00010020 vaddr=3c040020 size=15bbch ( 89020) map
I (117) esp_image: segment 1: paddr=00025be4 vaddr=3fc93500 size=029e8h ( 10728) load
I (120) esp_image: segment 2: paddr=000285d4 vaddr=40374000 size=07a44h ( 31300) load
I (130) esp_image: segment 3: paddr=00030020 vaddr=42000020 size=33ce4h (212196) map
I (170) esp_image: segment 4: paddr=00063d0c vaddr=4037ba44 size=079e4h ( 31204) load
I (183) boot: Loaded app from partition at offset 0x10000
I (183) boot: Disabling RNG early entropy source...
I (195) cpu_start: Multicore app
I (195) cpu_start: Pro cpu up.
I (195) cpu_start: Starting app cpu, entry point is 0x403752b0
0x403752b0: call_start_cpu1 at /media/2TB/DATA/DEV/GIT/esp-idf/components/esp_system/port/cpu_start.c:170
I (0) cpu_start: App cpu up.
I (213) cpu_start: Pro cpu start user code
I (214) cpu_start: cpu freq: 160000000 Hz
I (214) cpu_start: Application information:
I (217) cpu_start: Project name: cdc_acm_vcp
I (222) cpu_start: App version: 1
I (226) cpu_start: Compile time: Sep 8 2023 10:45:32
I (232) cpu_start: ELF file SHA256: c9c6d100a...
I (238) cpu_start: ESP-IDF: v5.2-dev-1890-g28167ea5a3-dirty
I (245) cpu_start: Min chip rev: v0.0
I (249) cpu_start: Max chip rev: v0.99
I (254) cpu_start: Chip rev: v0.1
I (259) heap_init: Initializing. RAM available for dynamic allocation:
I (266) heap_init: At 3FC96950 len 00052DC0 (331 KiB): DRAM
I (272) heap_init: At 3FCE9710 len 00005724 (21 KiB): STACK/DRAM
I (279) heap_init: At 3FCF0000 len 00008000 (32 KiB): DRAM
I (285) heap_init: At 600FE010 len 00001FD8 (7 KiB): RTCRAM
I (292) spi_flash: detected chip: gd
I (296) spi_flash: flash io: dio
W (300) spi_flash: Detected size(16384k) larger than the size in the binary image header(2048k). Using the size in the binary image header.
I (314) gpio: GPIO[48]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
I (323) gpio: GPIO[44]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
I (332) gpio: GPIO[6]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
I (341) sleep: Configure to isolate all GPIO pins in sleep state
I (348) sleep: Enable automatic switching of GPIO sleep configuration
I (355) app_start: Starting scheduler on CPU0
I (360) app_start: Starting scheduler on CPU1
I (360) main_task: Started on CPU0
I (370) main_task: Calling app_main()
I (370) VCP example: Installing USB Host
I (410) VCP example: Installing CDC-ACM driver
I (410) VCP example: Opening any VCP device...
I (5660) VCP example: Failed to open VCP device
I (5660) VCP example: Opening any VCP device...
I (10910) VCP example: Failed to open VCP device
I (10910) VCP example: Opening any VCP device...
Guru Meditation Error: Core 0 panic'ed (LoadProhibited). Exception was unhandled.
Core 0 register dump:
PC : 0x4200c274 PS : 0x00060d30 A0 : 0x8200c836 A1 : 0x3fc9a730
0x4200c274: cdc_acm_transfers_allocate at /media/2TB/DATA/DEV/cdc_acm_vcp/managed_components/espressif__usb_host_cdc_acm/cdc_acm_host.c:625
A2 : 0x3fc9e650 A3 : 0x3fc9eae8 A4 : 0x00000000 A5 : 0x00000200
A6 : 0x00000000 A7 : 0x00000200 A8 : 0x4200bf04 A9 : 0x3fc9a710
0x4200bf04: in_xfer_cb at /media/2TB/DATA/DEV/cdc_acm_vcp/managed_components/espressif__usb_host_cdc_acm/cdc_acm_host.c:1009
A10 : 0x00000000 A11 : 0x00000000 A12 : 0x3fc9e65c A13 : 0x3fc9ea1c
A14 : 0xb33fffff A15 : 0xb33fffff SAR : 0x0000001b EXCCAUSE: 0x0000001c
EXCVADDR: 0x00000002 LBEG : 0x400570e8 LEND : 0x400570f3 LCOUNT : 0x00000000
0x400570e8: memset in ROM
0x400570f3: memset in ROM
Backtrace: 0x4200c271:0x3fc9a730 0x4200c833:0x3fc9a790 0x42009a6e:0x3fc9a7e0 0x4200a575:0x3fc9a800 0x4200a5a1:0x3fc9a820 0x4200bae6:0x3fc9a840 0x4200ab5f:0x3fc9a8b0 0x42032dd3:0x3fc9a910 0x4037d23d:0x3fc9a940
0x4200c271: cdc_acm_transfers_allocate at /media/2TB/DATA/DEV/cdc_acm_vcp/managed_components/espressif__usb_host_cdc_acm/cdc_acm_host.c:624
0x4200c833: cdc_acm_host_open_vendor_specific at /media/2TB/DATA/DEV/cdc_acm_vcp/managed_components/espressif__usb_host_cdc_acm/cdc_acm_host.c:859 (discriminator 6)
0x42009a6e: CdcAcmDevice::open_vendor_specific(unsigned short, unsigned short, unsigned char, cdc_acm_host_device_config_t const*) at /media/2TB/DATA/DEV/cdc_acm_vcp/managed_components/espressif__usb_host_cdc_acm/include/usb/cdc_acm_host.h:317
(inlined by) esp_usb::STM32::STM32(unsigned short, cdc_acm_host_device_config_t const*, unsigned char) at /media/2TB/DATA/DEV/cdc_acm_vcp/main/stm32_vcp.hpp:140
0x4200a575: esp_usb::VCP::register_driver<esp_usb::STM32>()::{lambda(unsigned short, cdc_acm_host_device_config_t const*, unsigned char)#1}::operator()(unsigned short, cdc_acm_host_device_config_t const*, unsigned char) const at /media/2TB/DATA/DEV/cdc_acm_vcp/managed_components/espressif__usb_host_vcp/include/usb/vcp.hpp:52
0x4200a5a1: esp_usb::VCP::register_driver<esp_usb::STM32>()::{lambda(unsigned short, cdc_acm_host_device_config_t const*, unsigned char)#1}::_FUN(unsigned short, cdc_acm_host_device_config_t const*, unsigned char) at /media/2TB/DATA/DEV/cdc_acm_vcp/managed_components/espressif__usb_host_vcp/include/usb/vcp.hpp:51
0x4200bae6: esp_usb::VCP::open(cdc_acm_host_device_config_t const*, unsigned char) at /media/2TB/DATA/DEV/cdc_acm_vcp/managed_components/espressif__usb_host_vcp/usb_host_vcp.cpp:72
0x4200ab5f: app_main at /media/2TB/DATA/DEV/cdc_acm_vcp/main/cdc_acm_vcp_example_main.cpp:227
0x42032dd3: main_task at /media/2TB/DATA/DEV/GIT/esp-idf/components/freertos/app_startup.c:217 (discriminator 13)
0x4037d23d: vPortTaskWrapper at /media/2TB/DATA/DEV/GIT/esp-idf/components/freertos/FreeRTOS-Kernel/portable/xtensa/port.c:162
ELF file SHA256: c9c6d100a
Rebooting...
esp-idf/examples/peripherals/usb/host/usb_host_lib with
CONFIG_USB_HOST_CONTROL_TRANSFER_MAX_SIZE=768 reports following about plugged device:
Code: Select all
*** Device descriptor ***
bLength 18
bDescriptorType 1
bcdUSB 2.00 --!!!!!
bDeviceClass 0x2
bDeviceSubClass 0x0
bDeviceProtocol 0x0
bMaxPacketSize0 64 --!!!!!
idVendor 0x483
idProduct 0x5740
bcdDevice 2.00
iManufacturer 1
iProduct 2
iSerialNumber 3
bNumConfigurations 1
I (6208) CLASS: Getting config descriptor
*** Configuration descriptor ***
bLength 9
bDescriptorType 2
wTotalLength 67
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
bMaxPower 100mA
*** Interface descriptor ***
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 0x2
bInterfaceSubClass 0x2
bInterfaceProtocol 0x1
iInterface 0
*** Endpoint descriptor ***
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 0x3 INT
wMaxPacketSize 8
bInterval 255
*** Interface descriptor ***
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 0xa
bInterfaceSubClass 0x0
bInterfaceProtocol 0x0
iInterface 0
*** Endpoint descriptor ***
bLength 7
bDescriptorType 5
bEndpointAddress 0x3 EP 3 OUT
bmAttributes 0x2 BULK
wMaxPacketSize 64
bInterval 0
*** Endpoint descriptor ***
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 0x2 BULK
wMaxPacketSize 64
bInterval 0
I (6308) CLASS: Getting Manufacturer string descriptor
STMicroelectronics
I (6318) CLASS: Getting Product string descriptor
STM32 Virtual COM Port
I (6328) CLASS: Getting Serial Number string descriptor
56FF766A3231