ESP32 SNTP not work over a pure IPv6 environment

hsy1000
Posts: 3
Joined: Mon Oct 18, 2021 7:38 am

ESP32 SNTP not work over a pure IPv6 environment

Postby hsy1000 » Mon May 08, 2023 7:40 am

I used ESP-IDF 4.4v. In order to distinguish my code from the problem of ESP-IDF, I test in the example of ESP-IDF.
esp-idf/examples/protocols/sntp
Modify like this:

Code: Select all

diff --git a/examples/protocols/sntp/main/sntp_example_main.c b/examples/protocols/sntp/main/sntp_example_main.c
index 3733241640..313fcfe001 100644
--- a/examples/protocols/sntp/main/sntp_example_main.c
+++ b/examples/protocols/sntp/main/sntp_example_main.c
@@ -21,6 +21,15 @@
 #include "protocol_examples_common.h"
 #include "esp_sntp.h"
 
+#include "esp_netif_net_stack.h"
+#include "lwip/netif.h"
+#include "ping/ping_sock.h"
+#include "lwip/err.h"
+#include "lwip/sys.h"
+#include "lwip/inet.h"
+#include "lwip/netdb.h"
+#include "lwip/sockets.h"
+
 static const char *TAG = "example";
 
 /* Variable holding number of times ESP32 restarted since first boot.
@@ -116,6 +125,17 @@ void app_main(void)
     esp_deep_sleep(1000000LL * deep_sleep_sec);
 }
 
+void test_task(void * arg)
+{
+	example_connect();
+
+    while(1)
+	{
+		vTaskDelay(50 / portTICK_PERIOD_MS);
+	}
+    vTaskDelete(NULL);
+}
+
 static void obtain_time(void)
 {
     ESP_ERROR_CHECK( nvs_flash_init() );
@@ -134,7 +154,9 @@ static void obtain_time(void)
      * Read "Establishing Wi-Fi or Ethernet Connection" section in
      * examples/protocols/README.md for more information about this function.
      */
-    ESP_ERROR_CHECK(example_connect());
+	xTaskCreate(test_task, "test_task", 20480, NULL, 10, NULL);
+	
+	vTaskDelay(10000 / portTICK_PERIOD_MS);
 
     initialize_sntp();
 
@@ -142,7 +164,7 @@ static void obtain_time(void)
     time_t now = 0;
     struct tm timeinfo = { 0 };
     int retry = 0;
-    const int retry_count = 10;
+    const int retry_count = 30;
     while (sntp_get_sync_status() == SNTP_SYNC_STATUS_RESET && ++retry < retry_count) {
         ESP_LOGI(TAG, "Waiting for system time to be set... (%d/%d)", retry, retry_count);
         vTaskDelay(2000 / portTICK_PERIOD_MS);
@@ -153,11 +175,44 @@ static void obtain_time(void)
     ESP_ERROR_CHECK( example_disconnect() );
 }
 
+int get_ip_addr_from_hostname(char *hostname, ip_addr_t *target_addr, int family)
+{
+	struct addrinfo hint;
+	struct addrinfo *res = NULL;
+	memset(&hint, 0, sizeof(hint));
+	hint.ai_family = family;
+	hint.ai_socktype = SOCK_STREAM;
+	hint.ai_flags = hint.ai_flags | AI_CANONNAME;
+
+	/* convert domain name to IP address */
+	int ret = getaddrinfo(hostname, NULL, &hint, &res);
+	if (ret != 0)
+	{
+		return -1;
+	}
+	if (res->ai_family == AF_INET)
+	{
+		struct in_addr addr4 = ((struct sockaddr_in *) (res->ai_addr))->sin_addr;
+		inet_addr_to_ip4addr(ip_2_ip4(target_addr), &addr4);
+	}
+	else
+	{
+		struct in6_addr addr6 = ((struct sockaddr_in6 *) (res->ai_addr))->sin6_addr;
+		inet6_addr_to_ip6addr(ip_2_ip6(target_addr), &addr6);
+	}
+	freeaddrinfo(res);
+	return 0;
+}
+
 static void initialize_sntp(void)
 {
     ESP_LOGI(TAG, "Initializing SNTP");
     sntp_setoperatingmode(SNTP_OPMODE_POLL);
-    sntp_setservername(0, "pool.ntp.org");
+	ip_addr_t target_addr;
+	memset(&target_addr, 0, sizeof(target_addr));
+	get_ip_addr_from_hostname("2.pool.ntp.org", &target_addr, AF_INET6);
+	ESP_LOGI(TAG, "IPv6 addr %08x, %08x, %08x, %08x", target_addr.u_addr.ip6.addr[0], target_addr.u_addr.ip6.addr[1], target_addr.u_addr.ip6.addr[2], target_addr.u_addr.ip6.addr[3]);
+	sntp_setserver(0, &target_addr);
     sntp_set_time_sync_notification_cb(time_sync_notification_cb);
 #ifdef CONFIG_SNTP_TIME_SYNC_METHOD_SMOOTH
     sntp_set_sync_mode(SNTP_SYNC_MODE_SMOOTH);
I also modify the sdkconfig. see the attachment

here is the result.

Code: Select all

I (5528) example_connect: Got IPv6 event: Interface "example_connect: sta" address: fe80:0000:0000:0000:b68a:0aff:fe24:ed98, type: ESP_IP6_ADDR_IS_LINK_LOCAL
I (5778) wifi:<ba-add>idx:0 (ifx:0, 0a:52:7f:ab:a0:47), tid:0, ssn:0, winSize:64
I (7528) example_connect: Got IPv6 event: Interface "example_connect: sta" address: 2001:0002:0000:aab1:b68a:0aff:fe24:ed98, type: ESP_IP6_ADDR_IS_GLOBAL
I (10528) example: Initializing SNTP
I (10528) example: IPv6 addr 02000120, aa1b0000, 00000000, 8d6fb6c1
I (10528) example: Waiting for system time to be set... (1/30)
I (12538) example: Waiting for system time to be set... (2/30)
I (14538) example: Waiting for system time to be set... (3/30)
I (16538) example: Waiting for system time to be set... (4/30)
I (18538) example: Waiting for system time to be set... (5/30)
I (20538) example: Waiting for system time to be set... (6/30)
I (22538) example: Waiting for system time to be set... (7/30)
I (24538) example: Waiting for system time to be set... (8/30)
I (26538) example: Waiting for system time to be set... (9/30)
I (28538) example: Waiting for system time to be set... (10/30)
I (30538) example: Waiting for system time to be set... (11/30)
I (32538) example: Waiting for system time to be set... (12/30)
I (34538) example: Waiting for system time to be set... (13/30)
I (36538) example: Waiting for system time to be set... (14/30)
I (38538) example: Waiting for system time to be set... (15/30)
I (40538) example: Waiting for system time to be set... (16/30)
I (42538) example: Waiting for system time to be set... (17/30)
I (44538) example: Waiting for system time to be set... (18/30)
I (46538) example: Waiting for system time to be set... (19/30)
I (48538) example: Waiting for system time to be set... (20/30)
I (50538) example: Waiting for system time to be set... (21/30)
I (52538) example: Waiting for system time to be set... (22/30)
I (54538) example: Waiting for system time to be set... (23/30)
I (56538) example: Waiting for system time to be set... (24/30)
I (58538) example: Waiting for system time to be set... (25/30)
I (60538) example: Waiting for system time to be set... (26/30)
I (62538) example: Waiting for system time to be set... (27/30)
I (64538) example: Waiting for system time to be set... (28/30)
I (66538) example: Waiting for system time to be set... (29/30)
I (68538) wifi:state: run -> init (0)
I (68538) wifi:pm stop, total sleep time: 61287149 us / 64606828 us

I (68538) wifi:<ba-del>idx
I (68538) wifi:new:<11,0>, old:<11,0>, ap:<255,255>, sta:<11,0>, prof:1
I (68628) wifi:flush txq
I (68628) wifi:stop sw txq
I (68628) wifi:lmac stop hw txq
I (68628) wifi:Deinit lldesc rx mblock:10
I (68638) example: The current date/time in New York is: Wed Dec 31 19:01:08 1969
I (68638) example: The current date/time in Shanghai is: Thu Jan  1 08:01:08 1970
I (68638) example: Entering deep sleep for 10 seconds
I use wireshake to capture packets, and you can see that the device does not perform SNTP at all.
BTW, if I provide a URL, in a pure IPv6 environment, SNTP won't even parse it for IPv6, just IPv4.
Attachments
image.png
image.png (335.38 KiB) Viewed 799 times
unnamed.png
unnamed.png (124.73 KiB) Viewed 799 times
1683530341601.jpg
1683530341601.jpg (33.56 KiB) Viewed 799 times

Who is online

Users browsing this forum: No registered users and 424 guests