ESP-Wrover-Kit V4.1 debugging error

[kostas_espressif]

I am using Wrover Kit v4.1 to debug a simple blink project. I followed all the steps of the manual but I am still getting this error.

Code: [Select all] [Expand/Collapse]

1. Open On-Chip Debugger v0.11.0-esp32-20221026 (2022-10-26-14:48)
2. Licensed under GNU GPL v2
3. For bug reports, read
4.     http://openocd.org/doc/doxygen/bugs.html
5. Flashing C:/Users/user/eclipse-workspace/bootloader_hooks/build/bootloader/bootloader.bin at 0x1000
6. Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED
7. Error: libusb_open() failed with LIBUSB_ERROR_NOT_FOUND
8. Error: no device found
9. Error: unable to open ftdi device with vid 0403, pid 6010, description '*', serial '*' at bus location '*'
10. Error: no device found
11. Error: unable to open ftdi device with vid 0403, pid 6014, description '*', serial '*' at bus location '*'
12. ** OpenOCD init failed **
13. shutdown command invoked
14. ** Flashing Failed **
15. -1
16. Started by GNU MCU Eclipse
17. Info : Listening on port 6666 for tcl connections
18. Info : Listening on port 4444 for telnet connections

GeSHi © Codebox Plus Extension

Any way to fix this issue ?