ESP32-C3 IDF5.0串口报错

[alphasion]

Code: [Select all] [Expand/Collapse]

1. uart_config_t uart_config = {
2.         .baud_rate = 115200,
3.         .data_bits = UART_DATA_8_BITS,
4.         .parity = UART_PARITY_DISABLE,
5.         .stop_bits = UART_STOP_BITS_1,
6.         .flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
7.         .source_clk = UART_SCLK_DEFAULT
8.     };
9.     uart_param_config(UART_NUM_1, &uart_config);
10.     uart_set_pin(UART_NUM_1, GPIO_NUM_7, GPIO_NUM_6, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE);
11.     uart_driver_install(UART_NUM_1, 16, 0, 0, NULL, 0);
12.    
13.     char* send_check = "AT\r\n";
14.     uart_write_bytes(UART_NUM_1, send_check, strlen(send_check));
15.     char recv_check[128];
16.     uart_read_bytes(UART_NUM_1, &recv_check, 128, 100);
17.     ESP_LOGI(TAG, "dataIn:%s", &recv_check);

GeSHi © Codebox Plus Extension

这是我根据example写出来的代码,但是会报错

Code: [Select all] [Expand/Collapse]

1. [0;31mE (253) uart: uart_driver_install(1562): uart rx buffer length error[0m
2. [0;31mE (253) uart: uart_write_bytes(1244): uart driver error[0m
3. [0;31mE (263) uart: uart_read_bytes(1281): uart driver error[0m
4. [0;32mI (263) scan: dataIn:[0m

GeSHi © Codebox Plus Extension

根据报错,uart_driver_install的缓存大小已经从16设置到128,都是如此,请问原因在哪

[yake827]

你应该把 rx_buffer_size 配置为比 FIFO 值 128 要大，一般建议1024.
这个是软件的Buffer值，也就是UART收到数据会先先从FIFO缓存到这个buffer里面，然后你read的时候可以取出来

[alphasion]

好的,我试试看,谢谢