LVGL screen shift on nvs_set

[Ludos_vic]

Hi everyone,

I have strange issue using LVGL and NVS library.

I use:
ESP-IDF 5.0
LVGL 8.3.0
FreeRTOS
Board:
ESP32-S3 WROOM 1
I have a some Screens in LVGL and everithing go well (Display and Touchscreen)
but in a Screen where i save a value in NVS, with the code below, the Screen shift a bit, and
everytime I call nvs_set_ all Screens of the GUI have horizontal shifting (like scroll), only rebooting they go back to the right position

Code: [Select all] [Expand/Collapse]

1. nvs_handle_t my_handle;
2. esp_err_t err;
3. err = nvs_open("storage", NVS_READWRITE, &my_handle);
4. err = nvs_set_u16(my_handle, "screen_lum", val);
5. ESP_LOGI(TAG," NVS err:%d",err);
6. nvs_commit(my_handle);
7. nvs_close(my_handle);

GeSHi © Codebox Plus Extension

Screen.png (13.35 KiB) Viewed 3126 times

Screen shifted.png (107.62 KiB) Viewed 3126 times

No error returned.
I call the nvs_flash_init() on initialization phase, and reading from NVS with nvs_get_u16() doesn't cause any problems.

Anyone can give me suggestions?

[ESP_Sprite]

How do you initialize the screen?

[Ludos_vic]

Notes:
the GUI task run on core 0, i try various StackDepth from 4000 to 120000
i call lv_tick_inc() from other task, not from timer callback, and this task run on core 1, but changing the core it's the same

Code: [Select all] [Expand/Collapse]

1. #define GUI_PERIOD              2
2. #define TICK_PERIOD             10
3. #define GUI_TASK_CORE                         0
4. #define TICK_TASK_CORE          1
5. void app_main(void)
6. {
7.     nvs_init();
8.     xTaskCreatePinnedToCore(Gui_Task, "Gui_Task", 120096, NULL,10, &guiTaskHandle, GUI_TASK_CORE);
9.     while (1) {
10.         vTaskDelay(pdMS_TO_TICKS(1000));
11.     }
12. }

GeSHi © Codebox Plus Extension

Code: [Select all] [Expand/Collapse]

1. void Gui_Task(void *arg)
2. {
3.     static lv_disp_draw_buf_t disp_buf;
4.     static lv_disp_drv_t disp_drv;      
5.  
6.     ESP_LOGI(TAG, "Create semaphores");
7.     sem_vsync_end = xSemaphoreCreateBinary();
8.     assert(sem_vsync_end);
9.     sem_gui_ready = xSemaphoreCreateBinary();
10.     assert(sem_gui_ready);
11.  
12.     init_backlight_pwm();
13.  
14.     ESP_LOGI(TAG, "Install RGB LCD panel driver");
15.     esp_lcd_panel_handle_t panel_handle = NULL;
16.     esp_lcd_rgb_panel_config_t panel_config = {
17.         .data_width = 16, // RGB565 in parallel mode, thus 16bit in width
18.         .psram_trans_align = 64,
19.         .clk_src = LCD_CLK_SRC_DEFAULT,
20.         .disp_gpio_num = PIN_NUM_DISP_EN,
21.         .pclk_gpio_num = PIN_NUM_PCLK,
22.         .vsync_gpio_num = PIN_NUM_VSYNC,
23.         .hsync_gpio_num = PIN_NUM_HSYNC,
24.         .de_gpio_num = PIN_NUM_DE,
25.         .data_gpio_nums = {
26.             PIN_NUM_DATA0,PIN_NUM_DATA1,PIN_NUM_DATA2,PIN_NUM_DATA3,PIN_NUM_DATA4,
27.             PIN_NUM_DATA5,PIN_NUM_DATA6,PIN_NUM_DATA7,PIN_NUM_DATA8,PIN_NUM_DATA9,
28.             PIN_NUM_DATA10,PIN_NUM_DATA11,PIN_NUM_DATA12,PIN_NUM_DATA13,PIN_NUM_DATA14,PIN_NUM_DATA15,
29.         },
30.         .timings = {
31.             .pclk_hz = LCD_PIXEL_CLOCK_HZ,
32.             .h_res = LCD_H_RES,
33.             .v_res = LCD_V_RES,
34.             .hsync_back_porch = HSYNC_BACK_PORCH,
35.             .hsync_front_porch = HSYNC_FRONT_PORCH,
36.             .hsync_pulse_width = HSYNC_PULSE_WIDTH,
37.             .vsync_back_porch = VSYNC_BACK_PORCH,
38.             .vsync_front_porch = VSYNC_FRONT_PORCH,
39.             .vsync_pulse_width = VSYNC_PULSE_WIDTH,
40.             .flags.pclk_active_neg = true,
41.         },
42.         .flags.fb_in_psram = true,
43.     };
44.     ESP_ERROR_CHECK(esp_lcd_new_rgb_panel(&panel_config, &panel_handle));
45.  
46.     ESP_LOGI(TAG, "Register event callbacks");
47.     esp_lcd_rgb_panel_event_callbacks_t cbs = {
48.         .on_vsync = on_vsync_event,
49.     };
50.     ESP_ERROR_CHECK(esp_lcd_rgb_panel_register_event_callbacks(panel_handle, &cbs, &disp_drv));
51.  
52.     ESP_LOGI(TAG, "Initialize RGB LCD panel");
53.     ESP_ERROR_CHECK(esp_lcd_panel_reset(panel_handle));
54.     ESP_ERROR_CHECK(esp_lcd_panel_init(panel_handle));
55.  
56.     i2c_master_init();
57.     esp_lcd_touch_config_t tp_cfg = {
58.         .x_max =LCD_H_RES,
59.         .y_max = LCD_V_RES,
60.         .rst_gpio_num = TOUCH_GT911_RST,
61.         .int_gpio_num = -1,
62.         .flags = {
63.             .swap_xy = 0,
64.             .mirror_x = 0,
65.             .mirror_y = 0,
66.         },
67.     };
68.  
69.     esp_lcd_panel_io_handle_t tp_io_handle = NULL;
70.     esp_lcd_panel_io_i2c_config_t io_config = ESP_LCD_TOUCH_IO_I2C_GT911_CONFIG();
71.     ESP_ERROR_CHECK(esp_lcd_new_panel_io_i2c((esp_lcd_i2c_bus_handle_t)I2C_NUM_0, &io_config, &tp_io_handle));
72.     ESP_LOGI(TAG, "Initialize touch controller GT911");
73.     ESP_ERROR_CHECK(esp_lcd_touch_new_i2c_gt911(tp_io_handle, &tp_cfg, &tp));
74.  
75.  
76.     ESP_LOGI(TAG, "Initialize LVGL library");
77.     lv_init();
78.     void *buf1 = NULL;
79.     void *buf2 = NULL;
80.     buf1 = heap_caps_malloc(LCD_H_RES * 100 * sizeof(lv_color_t), MALLOC_CAP_SPIRAM);
81.     assert(buf1);
82.     buf2 = heap_caps_malloc(LCD_H_RES * 100 * sizeof(lv_color_t), MALLOC_CAP_SPIRAM);
83.     assert(buf2);
84.     lv_disp_draw_buf_init(&disp_buf, buf1, buf2, LCD_H_RES * 100);
85.  
86.     ESP_LOGI(TAG, "Register display driver to LVGL");
87.     lv_disp_drv_init(&disp_drv);
88.     disp_drv.hor_res = LCD_H_RES;
89.     disp_drv.ver_res = LCD_V_RES;
90.     disp_drv.flush_cb = lvgl_flush_cb;
91.     disp_drv.draw_buf = &disp_buf;
92.     disp_drv.user_data = panel_handle;
93.     lv_disp_t *disp = lv_disp_drv_register(&disp_drv);  
94.  
95.     /****   Init Touchpad GT911   **********/
96.  
97.     static lv_indev_drv_t indev_drv;    
98.     lv_indev_drv_init(&indev_drv);
99.     indev_drv.type = LV_INDEV_TYPE_POINTER;
100.     indev_drv.disp = disp;
101.     indev_drv.read_cb = lvgl_touch_cb;
102.     indev_drv.user_data = tp;
103.  
104.     lv_indev_drv_register(&indev_drv);    
105.  
106.     ui_init();
107.    
108.     xTaskCreatePinnedToCore(Tick_Task, "Tick_Task", 4096, NULL,1, &tickTaskHandle, TICK_TASK_CORE);
109.  
110.     while(1){        
111.         lv_timer_handler();
112.         vTaskDelay(GUI_PERIOD);        
113.     }
114. }

GeSHi © Codebox Plus Extension

Code: [Select all] [Expand/Collapse]

1. void nvs_init(){
2.     esp_err_t err = nvs_flash_init();
3.     //err = nvs_flash_init_partition("storage");
4.     if (err == ESP_ERR_NVS_NO_FREE_PAGES || err == ESP_ERR_NVS_NEW_VERSION_FOUND) {
5.         // NVS partition was truncated and needs to be erased
6.         // Retry nvs_flash_init
7.         ESP_ERROR_CHECK(nvs_flash_erase());
8.         err = nvs_flash_init();
9.         ESP_LOGI(TAG, "NVS Init error:%d",err);
10.     }
11.     ESP_ERROR_CHECK( err );/* esp_err_t*/
12.     ESP_LOGI(TAG, "NVS Error: %d",err);
13.     ESP_LOGI(TAG, "NVS Initialized");
14. }

GeSHi © Codebox Plus Extension

Code: [Select all] [Expand/Collapse]

1. void Tick_Task(void *arg)
2. {
3.     while(1){
4.         lv_tick_inc(30);
5.         vTaskDelay(TICK_PERIOD);
6.     }
7. }

GeSHi © Codebox Plus Extension

[ESP_Sprite]

Looks like your framebuffer and DMA somehow get de-synced somehow. Can you try adding '.bounce_buffer_size_px=LCD_H_RES*8' to your panel_config and see if that helps?

[Ludos_vic]

trying with .bouce_buffer_size_px = 8 * LCD_H_RES the screen drift vertical but more sporadically but your suggestion help my to find the right way...in fact it is a synchronization problem

I finally solved it with this combination:

.bounce_buffer_size_px = 20 * LCD_H_RES,

reduce the size of buffer in the PSRAM and don't use the second buffer

buf1 = heap_caps_malloc(LCD_H_RES * 100 * sizeof(lv_color_t), MALLOC_CAP_SPIRAM);
assert(buf1);
/*buf2 = heap_caps_malloc(LCD_H_RES * 100 * sizeof(lv_color_t), MALLOC_CAP_SPIRAM);
assert(buf2);*/
// initialize LVGL draw buffers
lv_disp_draw_buf_init(&disp_buf, buf1, buf2, LCD_H_RES * 100);

and this in sdkconfig

CONFIG_SPIRAM_FETCH_INSTRUCTIONS=y
CONFIG_SPIRAM_RODATA=y
CONFIG_LCD_RGB_RESTART_IN_VSYNC=y

The only problem is that when the screen goes out of sync and is re-synchronized due to CONFIG_LCD_RGB_RESTART_IN_VSYNC, the Screen have a little flash, but with this combination of settings the event is very sporadic, and I think it's an acceptable solution

this link also helped me
https://espressif-docs.readthedocs-host ... s/lcd.html