ESP32 port not being seen by computer although having Silicon Labs CP2102 Driver

[Zenith Fall]

Hello I'm very new to ESP32 and the world of micro-controllers.

I have ESP32 with me and the Silicon Labs Dual CP2105 USB to UART Bridge: Standard COM Port
driver installed.

And the port is not still being recognized. I have no idea why and I'm asking for help.

I'll give some general details here:

- ESP32 with CP2102
- having USB cable with data link
- Windows 10
- I have added the driver manually from the Action > Add legacy hardware because it wasn't (the driver) showing up in the first place

[evans_picolo]

Hello,

Have you tested another USB cable? ESP32 seems to be very sensitive with poor quality cables.

[Zenith Fall]

Hello,

Have you tested another USB cable? ESP32 seems to be very sensitive with poor quality cables.

Thank you for taking your time to respond

Yes I have same issue. Tried with 3 cables and no result.

I think i should add this point as well.

- there was a uart to usb bridge controller under Other devices
- I uninstalled thinking the driver wasn't installer properly (this is a grave mistake i feel)

[Zenith Fall]

UPDATE

It seems the issue is actually with the cable
Do get a cable like this (url below) for the ESP to be working

https://robu.in/product/50-cm-micro-usb-cable/