ESP32 Forum

Code: Select all

    else{
        //log_e("Experiment off");
        digitalWrite(XPERIMENT_ON_PIN,HIGH);
        doConnect = false;
        if(NimBLEDevice::getScan()->isScanning())
        {
            //We add delays, so that the GATT server has time to either startup- or shutdown before th button can pressed again
            vTaskDelay(1000/portTICK_PERIOD_MS);
            NimBLEDevice::getScan()->stop();
            vTaskDelay(1000/portTICK_PERIOD_MS);
        }
        state = STATE_IDLE;
    }

Code: Select all

    if(xperiment_on)
    {
        digitalWrite(XPERIMENT_ON_PIN,LOW);
        switch(state)
        {
            case STATE_IDLE:

                log_e("%i",xperiment_on);
                log_e("State: Idle");

                if(!print_on)
                {

                    NimBLEDevice::getScan()->start(scanTime,scanEndedCB);
                    state = STATE_LISTENING;
                }

                break;

            case STATE_LISTENING:


                //If we can connect to our server
                if(doConnect)
                {
                    connectToServer();
                    doConnect = false;

                    digitalWrite(BLE_FLASH_PIN,HIGH);
                    vTaskDelay(100/portTICK_PERIOD_MS);
                    digitalWrite(BLE_FLASH_PIN,LOW);

                    if(xperiment_on){
                    insert_at_carriage_return_and_save(TIMESTEP_VALUE_ARRAY_PATH,(time_last_read-time_start),SIZE_OF_TIMESTAMP_AFTER_FORMATTING,TIMESTEP_VALUE_ARRAY_SIZE,timestep_count*SIZE_OF_TIMESTAMP_AFTER_FORMATTING,&timestep_count);
                    insert_at_carriage_return_and_save(SWC_VALUE_ARRAY_PATH,SWC_read,SIZE_OF_SWC_AFTER_FORMATTING,SWC_VALUE_ARRAY_SIZE,SWC_counter*SIZE_OF_SWC_AFTER_FORMATTING,&SWC_counter);
                    state = STATE_VALUE_RECEIVED;}
                }

                break;