Hello all, I was trying to upload a ChatGPT example, but it always shows the same message. I'm using an ESP Launchpad and a Mac OS.
Another problem arises when I connect the ESP Box to the USB port of another laptop with Windows; the ESP Box does not appear in the list of COM ports, only as an Android device. I have tried pushing the buttons in various ways, but without any success.
Thanks in advance.
I (1450) gpio: GPIO[4]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
I (1450) gpio: GPIO[48]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
I (1573) gpio: GPIO[3]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:2
E (1573) lcd_panel.io.i2c: panel_io_i2c_rx_buffer(135): i2c transaction failed
E (1574) TT21100: esp_lcd_touch_tt21100_read_data(173): I2C read error!
E (1574) TT21100: esp_lcd_touch_new_i2c_tt21100(103): TT21100 init failed
E (1574) TT21100: Error (0xffffffff)! Touch controller TT21100 initialization failed!
I (1575) gpio: GPIO[3]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
ESP_ERROR_CHECK failed: esp_err_t 0xffffffff at 0x4203a70e
file: "./managed_components/espressif__esp-box/esp-box.c" line 389
func: bsp_display_indev_init
expression: bsp_touch_new(((void *)0), &tp)
abort() was called at PC 0x403889a3 on core 0
Backtrace: 0x40379d36:0x3fcb1b40 0x403889ad:0x3fcb1b60 0x4038dbe6:0x3fcb1b80 0x403889a3:0x3fcb1bf0 0x4203a70e:0x3fcb1c20 0x4203a7a5:0x3fcb1c50 0x4203a7d9:0x3fcb1c70 0x42009c92:0x3fcb1cb0 0x4214a10e:0x3fcb1cf0 0x40388f12:0x3fcb1d20
ESP Launchpad MAC vs Windows issues ESP S3 BOX
-
- Posts: 95
- Joined: Wed Nov 10, 2021 9:28 am
Re: ESP Launchpad MAC vs Windows issues ESP S3 BOX
Is the development board in your hand ESP32-S3-BOX or ESP32-S3-BOX-Lite or ESP32-S3-BOX-3? You need to make sure that the firmware you are flashing corresponds to your development board.
For ESP Box does not appear in the list of COM ports. Please hold down the Boot button and then press the Reset button to manually initiate Firmware Download mode.
For ESP Box does not appear in the list of COM ports. Please hold down the Boot button and then press the Reset button to manually initiate Firmware Download mode.
Who is online
Users browsing this forum: No registered users and 15 guests