ESP32 Forum

ESP32-S3-BOX lite 无法写入显示 “OpenOCD没有运行，你想启动它吗”

f:\ESP\esp5.1\tools\cmake\3.24.0\bin\cmake.exe

F:\boliu\bouffalo_sdk_vmg0-vmg0\tools\cmake\bin\cmake

F:\boliu\bouffalo_sdk_vmg0-vmg0\tools\cmake\bin\cmake.exe

f:\ESP\esp5.1\tools\ninja\1.10.2\ninja.exe

Open On-Chip Debugger v0.12.0-esp32-20230419 (2023-04-18-22:02)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html

f:\ESP\esp5.1\tools\openocd-esp32\v0.12.0-esp32-20230419\openocd-esp32\bin\openocd.exe


Can't perform JTag flash, because OpenOCD server is not running!
['COM1', 'COM8']

f:\ESP\esp5.1\tools\cmake\3.24.0\bin\cmake.exe

F:\boliu\bouffalo_sdk_vmg0-vmg0\tools\cmake\bin\cmake

F:\boliu\bouffalo_sdk_vmg0-vmg0\tools\cmake\bin\cmake.exe

f:\ESP\esp5.1\tools\ninja\1.10.2\ninja.exe

f:\ESP\esp5.1\tools\cmake\3.24.0\bin\cmake.exe

F:\boliu\bouffalo_sdk_vmg0-vmg0\tools\cmake\bin\cmake

F:\boliu\bouffalo_sdk_vmg0-vmg0\tools\cmake\bin\cmake.exe

f:\ESP\esp5.1\tools\ninja\1.10.2\ninja.exe

Open On-Chip Debugger v0.12.0-esp32-20230419 (2023-04-18-22:02)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html

f:\ESP\esp5.1\tools\openocd-esp32\v0.12.0-esp32-20230419\openocd-esp32\bin\openocd.exe


[OpenOCD]
Open On-Chip Debugger v0.12.0-esp32-20230419 (2023-04-18-22:02)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html

f:\ESP\esp5.1\tools\openocd-esp32\v0.12.0-esp32-20230419\openocd-esp32\bin\openocd.exe

[OpenOCD]
debug_level: 2

[OpenOCD]
adapter speed: 20000 kHz

[OpenOCD]
Info : Listening on port 6666 for
[OpenOCD]
tcl connections
Info : Listening on port 4444 for telnet connections

[OpenOCD]
Error: unable to open ftdi device
[OpenOCD]
with description '*', serial '*' at bus location '*'
f:\ESP\esp5.1\tools\openocd-esp32\v0.12.0-esp32-20230419/openocd-esp32/share/openocd/scripts/target/esp_common.cfg:4: Error:
at file "f:\ESP\esp5.1\tools\openocd-esp32\v0.12.0-esp32-20230419/openocd-esp32/share/openocd/scripts/target/esp_common.cfg", line 4

[OpenOCD]
[Stopped] : OpenOCD Server

Can't perform JTag flash, because OpenOCD server is not running!

您好，

请问您目前是想给 ESP32-S3-BOX lite 烧录固件吗？

这样的话，您无需使用 openocd ，直接用 launchpad 即可烧录固件 https://espressif.github.io/esp-launchp ... aunch.toml

如果您需要进行 jtag 调试，您可以参考 https://docs.espressif.com/projects/esp ... index.html