ESP32 Forum

Code: Select all

//This example demonstrates the ESP RainMaker with a custom device
#include "RMaker.h"
#include "WiFi.h"
#include "WiFiProv.h"

#define DEFAULT_POWER_MODE true
#define DEFAULT_NAME1 0
#define DEFAULT_NAME2 0

const char *service_name = "PROV_1234";
const char *pop = "abcd1234";

#define BOTtoken "Token"  //// your Bot Token (Get from Botfather)
#define CHAT_ID "Chat_ID"  ////
int Chat_ID; ////
const char *Token; ////

//GPIO for push button
#if CONFIG_IDF_TARGET_ESP32C3
static int gpio_0 = 9;
static int gpio_dimmer = 7;
#else
//GPIO for virtual device
static int gpio_0 = 0;
static int gpio_dimmer = 16;
#endif

bool dimmer_state = true;

// The framework provides some standard device types like switch, lightbulb, fan, temperature sensor.
// But, you can also define custom devices using the 'Device' base class object, as shown here
static Device *my_device = NULL;

void sysProvEvent(arduino_event_t *sys_event)
{
    switch (sys_event->event_id) {
    case ARDUINO_EVENT_PROV_START:
#if CONFIG_IDF_TARGET_ESP32S2
        Serial.printf("\nProvisioning Started with name \"%s\" and PoP \"%s\" on SoftAP\n", service_name, pop);
        printQR(service_name, pop, "softap");
#else
        Serial.printf("\nProvisioning Started with name \"%s\" and PoP \"%s\" on BLE\n", service_name, pop);
        printQR(service_name, pop, "ble");
#endif
        break;
    case ARDUINO_EVENT_PROV_INIT:
        wifi_prov_mgr_disable_auto_stop(10000);
        break;
    case ARDUINO_EVENT_PROV_CRED_SUCCESS:
        wifi_prov_mgr_stop_provisioning();
        break;
    default:;
    }
}

void write_callback(Device *device, Param *param, const param_val_t val, void *priv_data, write_ctx_t *ctx)
{
    const char *device_name = device->getDeviceName();
    const char *param_name = param->getParamName();

    if (strcmp(param_name, "Chat_ID") == 0) {
        Serial.printf("\nReceived value = %d for %s - %s\n", val.val.i, device_name, param_name);
        param->updateAndReport(val);
    }
     else if (strcmp(param_name, "Token") == 0) {
        Serial.printf("\nReceived value = %d for %s - %s\n", val.val.s, device_name, param_name);
        param->updateAndReport(val);
}
}

void setup()
{
    Serial.begin(115200);
    pinMode(gpio_0, INPUT);
    pinMode(gpio_dimmer, OUTPUT);
    digitalWrite(gpio_dimmer, DEFAULT_POWER_MODE);
    
    Node my_node;
    my_node = RMaker.initNode("ESP RainMaker Node");
    my_device = new Device("Telegram", "custom.device.other", &gpio_dimmer);
    if (!my_device) {
        return;
    }
    //Create custom dimmer device
    my_device->addNameParam();
    my_device->assignPrimaryParam(my_device->getParamByName(ESP_RMAKER_DEF_POWER_NAME));

    //Create and add a custom level parameter
    Param Chat_ID_param("Chat_ID", "custom.param.level", value(DEFAULT_NAME1), PROP_FLAG_READ | PROP_FLAG_WRITE);
    Chat_ID_param.addUIType(ESP_RMAKER_UI_TEXT);
    my_device->addParam(Chat_ID_param);
    
    Param Token_param("Token", "custom.param.level", value(DEFAULT_NAME2), PROP_FLAG_READ | PROP_FLAG_WRITE);
    Token_param.addUIType(ESP_RMAKER_UI_TEXT);
    my_device->addParam(Token_param);

    my_device->addCb(write_callback);
    
    //Add custom dimmer device to the node
    my_node.addDevice(*my_device);
    
    //This is optional
    RMaker.enableOTA(OTA_USING_TOPICS);
    //If you want to enable scheduling, set time zone for your region using setTimeZone().
    //The list of available values are provided here https://rainmaker.espressif.com/docs/time-service.html
    // RMaker.setTimeZone("Asia/Shanghai");
    // Alternatively, enable the Timezone service and let the phone apps set the appropriate timezone
    RMaker.enableTZService();

    RMaker.enableSchedule();

    RMaker.enableScenes();

    RMaker.start();

    WiFi.onEvent(sysProvEvent);
#if CONFIG_IDF_TARGET_ESP32S2
    WiFiProv.beginProvision(WIFI_PROV_SCHEME_SOFTAP, WIFI_PROV_SCHEME_HANDLER_NONE, WIFI_PROV_SECURITY_1, pop, service_name);
#else
    WiFiProv.beginProvision(WIFI_PROV_SCHEME_BLE, WIFI_PROV_SCHEME_HANDLER_FREE_BTDM, WIFI_PROV_SECURITY_1, pop, service_name);
#endif
}

void loop()
{
    if (digitalRead(gpio_0) == LOW) { //Push button pressed

        // Key debounce handling
        delay(100);
        int startTime = millis();
        while (digitalRead(gpio_0) == LOW) {
            delay(50);
        }
        int endTime = millis();

        if ((endTime - startTime) > 10000) {
            // If key pressed for more than 10secs, reset all
            Serial.printf("Reset to factory.\n");
            RMakerFactoryReset(2);
        } else if ((endTime - startTime) > 3000) {
            Serial.printf("Reset Wi-Fi.\n");
            // If key pressed for more than 3secs, but less than 10, reset Wi-Fi
            RMakerWiFiReset(2);
        } 
    }
    delay(100);
}

Code: Select all

#define DEFAULT_NAME1 "Id"
#define DEFAULT_NAME2 "Token"

Code: Select all

    Param Token_param("Token", "custom.param.level", value(DEFAULT_NAME2), PROP_FLAG_READ | PROP_FLAG_WRITE | PROP_FLAG_PERSIST);