Page 1 of 1

I would like to debug using Eclipse ESP-IDF and a ESP32-S3-DevKitC-1

Posted: Thu Jan 12, 2023 2:09 pm
by ThomasESP32
Good afternoon,

I have a ESP32-S3-DevKitC-1 kit and the Eclipse version of ESP-IDF.
Some times ago, I managed to debug on this platform using Eclipse and I took some notes.

In my notes, I wrote that I had to execute ESP-IDF 5.0 CMD and then execute the command
openocd –f board/esp32s3-builtin.cfg.

However, after reinstalling Eclipse ESP-IDF on a new computer, I do not manage to execute the ESP-IDP 5.0 CMD anymore.
The file idf_cmd_init.bat is not in the C:\Espressif directory.

I tried to execute the Universal Online Installer 2.18 but the procedure is very long.
The process is stuck on a window saying "Please wait while setup installs ESP-IDF Tools on your computer".

I don't know how much time I have to wait but it seams to be very long.

Best regards,

Thomas TRUILHE<

Re: I would like to debug using Eclipse ESP-IDF and a ESP32-S3-DevKitC-1

Posted: Tue Jan 17, 2023 10:40 am
by ESP_kondalkolipaka
Hello Thomas,

For some reason, if you're unable to install using an online installer(windows defender etc), please use Espressif-IDE 2.7.0 Windows offline installer
https://dl.espressif.com/dl/idf-install ... -4.4.3.exe

This will install esp-idf, esp-idf tools, espressif-ide and all the required plugins to get started.

Do let me know if you see any challenges with this.

Thanks!