[14:14:10.888]收←◆ESP-ROM:esp32c6-20220919
Build:Sep 19 2022
rst:0x1 (POWERON),boot:0xc (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:2
load:0x40875720,len:0x1804
load:0x4086c410,len:0xe58
load:0x4086e610,len:0x2e20
entry 0x4086c41a
[0;32mI (23) boot: ESP-IDF v5.2.1-dirty 2nd stage b
[14:14:10.947]收←◆ootloader[0m
[0;32mI (24) boot: compile time Jun 12 2024 20:28:23[0m
[0;32mI (24) boot: chip revision: v0.0[0m
[0;32mI (27) boot.esp32c6: SPI Speed : 80MHz[0m
[0;32mI (32) boot.esp32c6: SPI Mode : DIO[0m
[0;32mI (36) boot.esp32c6: SPI Flash Size : 8MB[0m
[0;32mI (41) boot: Enabling RNG early entropy source...[0m
[0;32mI (47) boot: Partition Table:[0m
[0;32mI (50) boot: ## Label Usage Type ST Offset Length[0m
[0;32mI (57) boot: 0 nvs WiFi data 01 02 00009000 00006000[0m
[0;32mI (65) boot: 1 phy_init RF data 01 01 0000f000 00001000[0m
[0;32mI (72) boot: 2 factory factory app 00 00 00010000 00100000[0m
[0;32mI (80) boot: 3 zb_storage Unknown data 01 81 00110000 00004000[0m
[0;32mI (87) boot: 4 zb_fct Unknown data 01 81 00114000 00000400[0m
[0;32mI (95) boot: End of partition table[0m
[0;32mI (9
[14:14:11.025]收←◆9) esp_image: segment 0: paddr=00010020 vaddr=42030020 size=0e148h ( 57672) map[0m
[0;32mI (119) esp_image: segment 1: paddr=0001e170 vaddr=40800000 size=01ea8h ( 7848) load[0m
[0;32mI (122) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=2e9a0h (190880) map[0m
[0;32mI (165) esp_image: segment 3: paddr=0004e9c8 vaddr=40801ea8 size=00e24h ( 3620) load[0m
[0;32mI (167) boot: Loaded app from partition at offset 0x10000[0m
[0;32mI (168) boot: Disabling RNG early entropy source...[0m
[0;32mI (185) cpu_start: Pro cpu up.[0m
[0;33mW (193) clk: esp_perip_clk_init() has not been implemented yet[0m
[0;32mI (200) cpu_start: Pro cpu start user code[0m
[0;32mI (200) cpu_start: cpu freq: 160000000 Hz[0m
[0;32mI (200) cpu_start: Application information:[0m
[0;32mI (203) cpu_start: Project name: rtthread[0m
[0;32mI (208) cpu_start: App version: 999[0m
[0;32mI (213) cpu_start: Compile time: Jul 21 2024 14:05:49[0m
[0;32mI (219) cpu_start: ELF file SHA256: 9dd6ed6abc0c70de...[0m
[0;32mI (225) cpu_start: ESP-IDF: 999[0m
[0;32mI (229) cpu_start: Min chi
[14:14:11.164]收←◆p rev: v0.0[0m
[0;32mI (234) cpu_start: Max chip rev: v0.99 [0m
[0;32mI (239) cpu_start: Chip rev: v0.0[0m
[0;32mI (244) cpu_start: next do core[0m
[0;32mI (251) heap_init: Initializing. RAM available for dynamic allocation:[0m
[0;32mI (258) heap_init: At 40830360 len 0004C2B0 (304 KiB): DRAM[0m
[0;32mI (264) heap_init: At 4087C610 len 000039F0 (14 KiB): STACK/DRAM[0m
[0;32mI (271) heap_init: At 50000020 len 00003FE0 (15 KiB): RTCRAM[0m
编译成功并烧录之后,串口打印发现卡在heap_init,然后不断重启是为什么?
Who is online
Users browsing this forum: No registered users and 70 guests