用WSL作为开发环境, log 开启 verbose, 有错误提示
Posted: Thu Apr 11, 2024 11:57 am
我的开发环境 ESP-IDF v5.3-dev-3225-g5a40bb8746, 芯片ESP32S3
log 设置为 verbose, 启动时有下面的提示. 请问要如何处理, 还有后面的为乱码提示.
log 设置为 verbose, 启动时有下面的提示. 请问要如何处理, 还有后面的为乱码提示.
- I (710) spi_flash: flash io: dio
- D (714) cpu_start: calling init function: 0x42001a60 on core: 0
- xtensa-esp32-elf-addr2line -pfiaC -e \\wsl$\Ubuntu/home/younggu/learned/blink/build/blink.elf 0x42001a60: [WinError 2] 绯荤粺鎵句笉鍒版寚瀹氱殑鏂囦
- 欢銆
- D (720) cpu_start: calling init function: 0x4200f9dc
- xtensa-esp32-elf-addr2line -pfiaC -e \\wsl$\Ubuntu/home/younggu/learned/blink/build/blink.elf 0x4200f9dc: [WinError 2] 绯荤粺鎵句笉鍒版寚瀹氱殑鏂囦
- 欢銆
- D (725) C++ init: Setting C++ exception emergency pool to 0.
- D (730) cpu_start: calling init function: 0x4200f4bc
- xtensa-esp32-elf-addr2line -pfiaC -e \\wsl$\Ubuntu/home/younggu/learned/blink/build/blink.elf 0x4200f4bc: [WinError 2] 绯荤粺鎵句笉鍒版寚瀹氱殑鏂囦
- 欢銆
- D (736) cpu_start: calling init function: 0x4037a374
- xtensa-esp32-elf-addr2line -pfiaC -e \\wsl$\Ubuntu/home/younggu/learned/blink/build/blink.elf 0x4037a374: [WinError 2] 绯荤粺鎵句笉鍒版寚瀹氱殑鏂囦
- 欢銆
- D (741) cpu_start: calling init function: 0x42002ee8
- xtensa-esp32-elf-addr2line -pfiaC -e \\wsl$\Ubuntu/home/younggu/learned/blink/build/blink.elf 0x42002ee8: [WinError 2] 绯荤粺鎵句笉鍒版寚瀹氱殑鏂囦
- 欢銆
- D (746) cpu_start: calling init function: 0x420020e8
- xtensa-esp32-elf-addr2line -pfiaC -e \\wsl$\Ubuntu/home/younggu/learned/blink/build/blink.elf 0x420020e8: [WinError 2] 绯荤粺鎵句笉鍒版寚瀹氱殑鏂囦
- 欢銆
- D (751) cpu_start: calling init function: 0x42004720 on core: 0
- xtensa-esp32-elf-addr2line -pfiaC -e \\wsl$\Ubuntu/home/younggu/learned/blink/build/blink.elf 0x42004720: [WinError 2] 绯荤粺鎵句笉鍒版寚瀹氱殑鏂囦
- 欢銆
- I (757) sleep: Configure to isolate all GPIO pins in sleep state
- I (763) sleep: Enable automatic switching of GPIO sleep configuration
- D (770) cpu_start: calling init function: 0x42001b80 on core: 0
- xtensa-esp32-elf-addr2line -pfiaC -e \\wsl$\Ubuntu/home/younggu/learned/blink/build/blink.elf 0x42001b80: [WinError 2] 绯荤粺鎵句笉鍒版寚瀹氱殑鏂囦
- 欢銆
- D (776) cpu_start: calling init function: 0x420087dc on core: 0
- xtensa-esp32-elf-addr2line -pfiaC -e \\wsl$\Ubuntu/home/younggu/learned/blink/build/blink.elf 0x420087dc: [WinError 2] 绯荤粺鎵句笉鍒版寚瀹氱殑鏂囦
- 欢銆
- D (782) cpu_start: calling init function: 0x42001b8c on core: 0
- xtensa-esp32-elf-addr2line -pfiaC -e \\wsl$\Ubuntu/home/younggu/learned/blink/build/blink.elf 0x42001b8c: [WinError 2] 绯荤粺鎵句笉鍒版寚瀹氱殑鏂囦
- 欢銆