ESP32-WROOM-32E N16R2 模组 esp-idf4.3.2配置外扩RAM

[Zsssssssss]

最近使用ESP32-WROOM-32E N16R2 模组 esp-idf4.3.2配置外扩RAM，模组一直复位，无法正常启动。但是更换esp-idf 4.4.6版本后可以正常运行。是4.3.2版本配置外扩RAM时还需要配置其他项吗？
以下是异常时打印的报文，望大佬解答。
rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 153911750, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:7456
load:0x40078000,len:15360
load:0x40080400,len:3744
entry 0x4008067c
[0;32mI (27) boot: ESP-IDF -128-NOTFOUND 2nd stage bootloader[0m
[0;32mI (28) boot: compile time 08:31:09[0m
[0;32mI (28) boot: chip revision: 3[0m
[0;32mI (31) boot_comm: chip revision: 3, min. bootloader chip revision: 0[0m
[0;32mI (38) boot.esp32: SPI Speed : 40MHz[0m
[0;32mI (43) boot.esp32: SPI Mode : DIO[0m
[0;32mI (48) boot.esp32: SPI Flash Size : 16MB[0m
[0;32mI (52) boot: Enabling RNG early entropy source...[0m
[0;32mI (58) boot: Partition Table:[0m
[0;32mI (61) boot: ## Label Usage Type ST Offset Length[0m
[0;32mI (68) boot: 0 nvs WiFi data 01 02 00009000 00006000[0m
[0;32mI (76) boot: 1 phy_init RF data 01 01 0000f000 00001000[0m
[0;32mI (83) boot: 2 factory factory app 00 00 00010000 00100000[0m
[0;32mI (91) boot: End of partition table[0m
[0;32mI (95) boot_comm: chip revision: 3, min. application chip revision: 0[0m
[0;32mI (102) esp_image: segment 0: paddr=00010020 vaddr=3f400020 size=0b380h ( 45952) map[0m
[0;32mI (128) esp_image: segment 1: paddr=0001b3a8 vaddr=3ffb0000 size=029d4h ( 10708) load[0m
[0;32mI (133) esp_image: segment 2: paddr=0001dd84 vaddr=40080000 size=02294h ( 8852) load[0m
[0;32mI (138) esp_image: segment 3: paddr=00020020 vaddr=400d0020 size=18bfch (101372) map[0m

[08:38:50.432]收←◆[0;32mI (181) esp_image: segment 4: paddr=00038c24 vaddr=40082294 size=0cda0h ( 52640) load[0m
[0;32mI (204) esp_image: segment 5: paddr=000459cc vaddr=50000000 size=00010h ( 16) load[0m
[0;32mI (212) boot: Loaded app from partition at offset 0x10000[0m
[0;32mI (212) boot: Disabling RNG early entropy source...[0m
[0;31mE (225) psram: Not a valid or known package id: 7[0m
Re-enable cpu cache.

abort() was called at PC 0x40083d88 on core 0

Backtrace:0x4008171e:0x3ffe3b50 0x40089095:0x3ffe3b70 0x4008de96:0x3ffe3b90 0x40083d88:0x3ffe3c00 0x400d4243:0x3ffe3c30 0x40081324:0x3ffe3c50 0x4007956d:0x3ffe3c80 |<-CORRUPTED


ELF file SHA256: 08a8e2ec034ef906

Rebooting...
ets Jul 29 2019 12:21:46