求助! 烧录esp32s3 usb otg固件失败，用官方的固件烧录软件通过串口烧录也会失败

[jy.dxj]

usage: esptool write_flash [-h] [--erase-all]
[--flash_freq {keep,80m,60m,48m,40m,30m,26m,24m,20m,16m,15m,12m}]
[--flash_mode {keep,qio,qout,dio,dout}]
[--flash_size FLASH_SIZE]
[--spi-connection SPI_CONNECTION] [--no-progress]
[--verify] [--encrypt]
[--encrypt-files <address> <filename> [<address> <filename> ...]]
[--ignore-flash-encryption-efuse-setting]
[--compress | --no-compress]
<address> <filename> [<address> <filename> ...]
esptool write_flash: error: argument <address> <filename>: [Errno 2] No such file or directory: 'storage.bin'
esptool.py esp32s3 -p COM12 -b 460800 --before=default_reset --after=hard_reset --no-stub write_flash --flash_mode dio --flash_freq 80m --flash_size 8MB 0x0 bootloader/bootloader.bin 0x10000 usb_otg_dev.bin 0x8000 partition_table/partition-table.bin 0x30a000 storage.bin
CMake Error at run_serial_tool.cmake:56 (message):
D:/Espressif/python_env/idf4.4_py3.11_env/Scripts/python.exe
D:/Espressif/frameworks/esp-idf-v4.4.5/components/esptool_py/esptool/esptool.py
--chip esp32s3 failed

[jy.dxj]

每次在vscode终端里面运行idf.py flash monitor就会出现上述输出，但是bulid project可以编译成功，不知道为什么无法烧录程序