麻烦官方帮忙看下:使用了IDF自带的i80 lcd 例程和 ADF网络收音机例程。每个功能只要独立运行都没有问题,只要组合在一起就会报错,报错信息如下,我的工程源码(链接:https://pan.baidu.com/s/1zb2pNXIjgvaofj7zv9KJqA 提取码:1234)
SP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0xb (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce3808,len:0x1638
load:0x403c9700,len:0xb68
load:0x403cc700,len:0x3014
entry 0x403c9938
I (24) boot: ESP-IDF HEAD-HASH-NOTFOUND 2nd stage bootloader
I (25) boot: compile time 15:38:44
I (25) boot: chip revision: v0.2
I (28) boot.esp32s3: Boot SPI Speed : 80MHz
I (32) boot.esp32s3: SPI Mode : DIO
I (37) boot.esp32s3: SPI Flash Size : 16MB
I (42) boot: Enabling RNG early entropy source...
I (47) boot: Partition Table:
I (51) boot: ## Label Usage Type ST Offset Length
I (58) boot: 0 nvs WiFi data 01 02 00009000 00004000
I (66) boot: 1 otadata OTA data 01 00 0000d000 00002000
I (73) boot: 2 phy_init RF data 01 01 0000f000 00001000
I (81) boot: 3 factory factory app 00 00 00010000 00300000
I (88) boot: 4 ota_0 OTA app 00 10 00310000 00400000
I (95) boot: 5 ota_1 OTA app 00 11 00710000 00400000
I (103) boot: 6 nvs_key NVS keys 01 04 00b10000 00001000
I (111) boot: End of partition table
I (115) boot: Defaulting to factory image
I (119) esp_image: segment 0: paddr=00010020 vaddr=3c0f0020 size=110600h (1115648) map
I (328) esp_image: segment 1: paddr=00120628 vaddr=3fc992e0 size=038e8h ( 14568) load
I (332) esp_image: segment 2: paddr=00123f18 vaddr=40374000 size=0c100h ( 49408) load
I (345) esp_image: segment 3: paddr=00130020 vaddr=42000020 size=e5890h (940176) map
I (514) esp_image: segment 4: paddr=002158b8 vaddr=40380100 size=091d8h ( 37336) load
I (530) boot: Loaded app from partition at offset 0x10000
I (531) boot: Disabling RNG early entropy source...
I (542) opi psram: vendor id : 0x0d (AP)
I (542) opi psram: dev id : 0x02 (generation 3)
I (543) opi psram: density : 0x03 (64 Mbit)
I (546) opi psram: good-die : 0x01 (Pass)
I (551) opi psram: Latency : 0x01 (Fixed)
I (556) opi psram: VCC : 0x01 (3V)
I (560) opi psram: SRF : 0x01 (Fast Refresh)
I (566) opi psram: BurstType : 0x01 (Hybrid Wrap)
I (571) opi psram: BurstLen : 0x01 (32 Byte)
I (576) opi psram: Readlatency : 0x02 (10 cycles@Fixed)
I (582) opi psram: DriveStrength: 0x00 (1/1)
I (588) spiram: Found 64MBit SPI RAM device
I (592) spiram: SPI RAM mode: sram 80m
I (597) spiram: PSRAM initialized, cache is in normal (1-core) mode.
I (604) cpu_start: Pro cpu up.
I (607) cpu_start: Single core mode
I (1031) spiram: SPI SRAM memory test OK
I (1040) cpu_start: Pro cpu start user code
I (1040) cpu_start: cpu freq: 240000000
I (1040) cpu_start: Application information:
I (1043) cpu_start: Project name: main
I (1048) cpu_start: App version: 1
I (1052) cpu_start: Compile time: Sep 9 2023 15:38:42
I (1058) cpu_start: ELF file SHA256: 77621d5b8d29283d...
I (1064) cpu_start: ESP-IDF: HEAD-HASH-NOTFOUND
I (1070) cpu_start: Min chip rev: v0.0
I (1075) cpu_start: Max chip rev: v0.99
I (1080) cpu_start: Chip rev: v0.2
I (1085) heap_init: Initializing. RAM available for dynamic allocation:
I (1092) heap_init: At 3FCA91E8 len 00040528 (257 KiB): D/IRAM
I (1099) heap_init: At 3FCE9710 len 00005724 (21 KiB): STACK/DIRAM
I (1105) heap_init: At 3FCF0000 len 00008000 (32 KiB): DRAM
I (1112) heap_init: At 600FE000 len 00002000 (8 KiB): RTCRAM
I (1118) spiram: Adding pool of 8192K of external SPI memory to heap allocator
I (1127) spi_flash: detected chip: gd
I (1130) spi_flash: flash io: dio
I (1135) sleep: Configure to isolate all GPIO pins in sleep state
I (1141) sleep: Enable automatic switching of GPIO sleep configuration
I (1148) cpu_start: Starting scheduler on PRO CPU.
I (1154) spiram: Reserving pool of 32K of internal memory for DMA/internal allocations
E (1154) esp32s3 PDA: [APP] Free memory: 8661167 bytes
E (1164) esp32s3 PDA: [APP]internal Free memory: 298903 bytes
I (1174) esp32s3 PDA: Turn off LCD backlight
I (1174) gpio: GPIO[6]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
I (1184) esp32s3 PDA: Initialize Intel 8080 bus
I (1194) esp32s3 PDA: Install LCD driver of ili9488
I (1194) gpio: GPIO[0]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
I (1494) esp32s3 PDA: Turn on LCD backlight
E (1494) lcd_panel.io.i2c: new i2c lcd panel io @0x3fcea43c,the device addr is:93
I (1494) gpio: GPIO[14]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
I (1524) GT911: TouchPad_ID:0x39,0x31,0x31
I (1524) GT911: TouchPad_Config_Version:65
E (1524) esp32s3 PDA: [APP] Free memory: 8657059 bytes
E (1524) esp32s3 PDA: [APP]internal Free memory: 295415 bytes
I (1534) esp32s3 PDA: Initialize LVGL library
I (1534) esp32s3 PDA: Register display driver to LVGL
E (1544) esp32s3 PDA: [APP] Free memory: 8657059 bytes
E (1544) esp32s3 PDA: [APP]internal Free memory: 289011 bytes
I (1554) esp32s3 PDA: Install LVGL tick timer
I (1554) esp32s3 PDA: Display LVGL animation
I (9184) PLAY_FLASH_MP3_CONTROL: [ 1 ] Start audio codec chip
I (9184) PLAY_FLASH_MP3_CONTROL: [2.0] Create audio pipeline for playback
I (9184) PLAY_FLASH_MP3_CONTROL: [2.1] Create http stream to read data
E (9194) PLAY_FLASH_MP3_CONTROL: [APP] Free memory: 8598931 bytes
E (9194) PLAY_FLASH_MP3_CONTROL: [APP]internal Free memory: 231911 bytes
I (9204) PLAY_FLASH_MP3_CONTROL: [2.2] Create i2s stream to write data to codec chip
I (9214) PLAY_FLASH_MP3_CONTROL: [2.3] Create i2s stream to write data to codec chip
E (9224) I2S_STREAM: 1
E (9224) I2S_STREAM: 2
E (9224) I2S_STREAM: 3
E (9234) I2S_STREAM: i2s->config.i2s_por:0
E (9234) I2S: 14
E (9244) I2S: 15
E (9244) I2S: 16
E (9244) I2S: 17
E (9244) I2S: 18
E (9254) I2S: 19
E (9254) I2S: 20
E (9254) I2S: 21
E (9254) I2S: 22
E (9264) I2S: 23
Guru Meditation Error: Core 0 panic'ed (StoreProhibited). Exception was unhandled.
Core 0 register dump:
PC : 0x40384582 PS : 0x00060533 A0 : 0x80384d48 A1 : 0x3fcbdc50
0x40384582: remove_free_block at C:/Espressif/frameworks/esp-idf-v4.4.5/components/heap/heap_tlsf.c:207
(inlined by) block_locate_free at C:/Espressif/frameworks/esp-idf-v4.4.5/components/heap/heap_tlsf.c:442
(inlined by) tlsf_malloc at C:/Espressif/frameworks/esp-idf-v4.4.5/components/heap/heap_tlsf.c:849
A2 : 0x3fca9980 A3 : 0x0000000c A4 : 0x00000009 A5 : 0x00000080
A6 : 0x00000000 A7 : 0x00000009 A8 : 0x3fcab60c A9 : 0x00000008
A10 : 0xffffffff A11 : 0x00000009 A12 : 0xfffffffc A13 : 0xffffffff
A14 : 0x00000004 A15 : 0xfffffffc SAR : 0x0000001f EXCCAUSE: 0x0000001d
EXCVADDR: 0x0000000b LBEG : 0x400556d5 LEND : 0x400556e5 LCOUNT : 0xfffffffe
Backtrace: 0x4038457f:0x3fcbdc50 0x40384d45:0x3fcbdc70 0x40375ed9:0x3fcbdc90 0x40375f17:0x3fcbdcb0 0x403763a0:0x3fcbdcd0 0x4205186f:0x3fcbdcf0 0x4205191c:0x3fcbdd20 0x42052cfb:0x3fcbdd50 0x4200b895:0x3fcbdd90 0x42007c48:0x3fcbde30 0x40381ee9:0x3fcbe000
0x4038457f: remove_free_block at C:/Espressif/frameworks/esp-idf-v4.4.5/components/heap/heap_tlsf.c:206
(inlined by) block_locate_free at C:/Espressif/frameworks/esp-idf-v4.4.5/components/heap/heap_tlsf.c:442
(inlined by) tlsf_malloc at C:/Espressif/frameworks/esp-idf-v4.4.5/components/heap/heap_tlsf.c:849
0x40384d45: multi_heap_malloc_impl at C:/Espressif/frameworks/esp-idf-v4.4.5/components/heap/multi_heap.c:187
0x40375ed9: heap_caps_malloc_base at C:/Espressif/frameworks/esp-idf-v4.4.5/components/heap/heap_caps.c:175
0x40375f17: heap_caps_calloc_base at C:/Espressif/frameworks/esp-idf-v4.4.5/components/heap/heap_caps.c:487
0x403763a0: heap_caps_calloc at C:/Espressif/frameworks/esp-idf-v4.4.5/components/heap/heap_caps.c:496
0x4205186f: i2s_create_dma_object at C:/Espressif/frameworks/esp-idf-v4.4.5/components/driver/i2s.c:905 (discriminator 2)
0x4205191c: i2s_dma_object_init at C:/Espressif/frameworks/esp-idf-v4.4.5/components/driver/i2s.c:2051
0x42052cfb: i2s_driver_install at C:/Espressif/frameworks/esp-idf-v4.4.5/components/driver/i2s.c:2127 (discriminator 3)
0x4200b895: i2s_stream_init at C:/Espressif/esp-adf/components/audio_stream/i2s_stream.c:520 (discriminator 3)
0x42007c48: play_stak at D:/ESP32S3/sample_project/main/play.c:101 (discriminator 2)
0x40381ee9: vPortTaskWrapper at C:/Espressif/frameworks/esp-idf-v4.4.5/components/freertos/port/xtensa/port.c:142
ESP32S3 IDF+ADF+LVGL只要启动ADF例程就会崩溃
-
- Posts: 1
- Joined: Mon Sep 11, 2023 12:14 am
Jump to
- English Forum
- Explore
- News
- General Discussion
- FAQ
- Documentation
- Documentation
- Sample Code
- Discussion Forum
- Hardware
- ESP-IDF
- ESP-BOX
- ESP-ADF
- ESP-MDF
- ESP-WHO
- ESP-SkaiNet
- ESP32 Arduino
- IDEs for ESP-IDF
- ESP-AT
- ESP IoT Solution
- ESP RainMaker
- Rust
- ESP8266
- Report Bugs
- Showcase
- Chinese Forum 中文社区
- 活动区
- 乐鑫活动专区
- 讨论区
- 全国大学生物联网设计竞赛乐鑫答疑专区
- ESP-IDF 中文讨论版
- 《ESP32-C3 物联网工程开发实战》书籍讨论版
- 中文文档讨论版
- ESP-AT 中文讨论版
- ESP-BOX 中文讨论版
- ESP IoT Solution 中文讨论版
- ESP-ADF 中文讨论版
- ESP Mesh 中文讨论版
- ESP Cloud 中文讨论版
- ESP-WHO 中文讨论版
- ESP-SkaiNet 中文讨论版
- ESP 生产支持讨论版
- 硬件问题讨论
- 项目展示
Who is online
Users browsing this forum: No registered users and 53 guests
- All times are UTC
- Top
- Delete cookies
About Us
Espressif Systems is a fabless semiconductor company providing cutting-edge low power WiFi SoCs and wireless solutions for wireless communications and Internet of Things applications. ESP8266EX and ESP32 are some of our products.