esp32-s3进入深度睡眠后快速重启

[robbietree]

基本信息
芯片: esp32-s3r2
esp-idf版本: release/v4.4 commit-id: 76caa64286b0e93207ad06f68830a223be49cc88
外接32MB flash

现象:

长按关机后，芯片立即重启，重启原因USB_UART_CHIP_RESET

相关日志:

Code: [Select all] [Expand/Collapse]

1. I (31484) app-button: button long press
2. read failed: [Errno 6] Device not configured
3. Waiting for the device to reconnect
4. ESP-ROM:esp32s3-20210327
5. Build:Mar 27 2021
6. rst:0x15 (USB_UART_CHIP_RESET),boot:0x29 (SPI_FAST_FLASH_BOOT)
7. Saved PC:0x4201b2ba
8. 0x4201b2ba: esp_pm_impl_waiti at /Users/robbietree/IdeaProjects/git/github/esp-idf/components/esp_pm/pm_impl.c:839
9.  
10. SPIWP:0xee
11. mode:DIO, clock div:1
12. load:0x3fce3808,len:0x1674
13. load:0x403c9700,len:0xbb8
14. load:0x403cc700,len:0x2f10
15. entry 0x403c9954
16. I (24) boot: ESP-IDF v4.4.3-145-g76caa64286-dirty 2nd stage bootloader
17. I (25) boot: compile time 17:11:41
18. I (25) boot: chip revision: 0
19. I (28) boot.esp32s3: Boot SPI Speed : 80MHz
20. I (33) boot.esp32s3: SPI Mode       : DIO
21. I (38) boot.esp32s3: SPI Flash Size : 32MB
22. I (42) boot: Enabling RNG early entropy source...
23. I (48) boot: Partition Table:
24. I (51) boot: ## Label            Usage          Type ST Offset   Length
25. I (59) boot:  0 nvs              WiFi data        01 02 00009000 00004000
26. I (66) boot:  1 phy_init         RF data          01 01 0000d000 00001000
27. I (74) boot:  2 factory          factory app      00 00 00010000 00300000
28. I (81) boot:  3 storage          Unknown data     01 82 00320000 00100000
29. I (89) boot: End of partition table
30. I (93) esp_image: segment 0: paddr=00010020 vaddr=3c020020 size=09e20h ( 40480) map
31. I (108) esp_image: segment 1: paddr=00019e48 vaddr=3fc93ab0 size=02b8ch ( 11148) load
32. I (112) esp_image: segment 2: paddr=0001c9dc vaddr=40374000 size=0363ch ( 13884) load
33. I (121) esp_image: segment 3: paddr=00020020 vaddr=42000020 size=1c2e8h (115432) map
34. I (147) esp_image: segment 4: paddr=0003c310 vaddr=4037763c size=0c474h ( 50292) load
35. I (159) esp_image: segment 5: paddr=0004878c vaddr=600fe000 size=0002ch (    44) load
36. I (165) boot: Loaded app from partition at offset 0x10000
37. I (166) boot: Disabling RNG early entropy source...
38. I (179) spiram: Found 16MBit SPI RAM device
39. I (179) spiram: SPI RAM mode: sram 40m
40. I (179) spiram: PSRAM initialized, cache is in normal (1-core) mode.
41. I (184) cpu_start: Pro cpu up.
42. I (188) cpu_start: Starting app cpu, entry point is 0x403753fc
43. 0x403753fc: call_start_cpu1 at /Users/git/github/esp-idf/components/esp_system/port/cpu_start.c:148
44.  
45. I (0) cpu_start: App cpu up.
46. I (613) spiram: SPI SRAM memory test OK
47. I (622) cpu_start: Pro cpu start user code
48. I (622) cpu_start: cpu freq: 160000000
49. I (622) cpu_start: Application information:
50. I (625) cpu_start: Project name:     fusion_glasses_medical
51. I (631) cpu_start: App version:      261c361-dirty
52. I (637) cpu_start: Compile time:     Nov 15 2022 14:21:44
53. I (643) cpu_start: ELF file SHA256:  44162d5beda2077b...
54. I (649) cpu_start: ESP-IDF:          v4.4.3-145-g76caa64286-dirty
55. I (655) heap_init: Initializing. RAM available for dynamic allocation:
56. I (663) heap_init: At 3FC972A0 len 00052470 (329 KiB): D/IRAM
57. I (669) heap_init: At 3FCE9710 len 00005724 (21 KiB): STACK/DRAM
58. I (676) heap_init: At 3FCF0000 len 00008000 (32 KiB): DRAM
59. I (682) heap_init: At 600FE02C len 00001FD4 (7 KiB): RTCRAM
60. I (688) spiram: Adding pool of 2048K of external SPI memory to heap allocator
61. I (697) spi_flash: detected chip: gd
62. I (700) spi_flash: flash io: dio
63. I (705) sleep: Configure to isolate all GPIO pins in sleep state
64. I (711) sleep: Enable automatic switching of GPIO sleep configuration
65. I (718) coexist: coexist rom version e7ae62f
66. I (723) cpu_start: Starting scheduler on PRO CPU.
67. I (0) cpu_start: Starting scheduler on APP CPU.
68. I (734) spiram: Reserving pool of 32K of internal memory for DMA/internal allocations
69. I (744) app-deep-sleep: init deep sleep on pin 5
70. wakeup cause: 0
71. Not a deep sleep reset

GeSHi © Codebox Plus Extension

相关代码:

Code: [Select all] [Expand/Collapse]

1. #define FEATURE_TOGGLE_PIN 5
2.  
3. static void button_long_press_hold_cb(void *arg1, void *arg2)
4. {
5.     ESP_LOGI(TAG, "button long press");
6.     enter_deep_sleep();
7. }
8.  
9. static void setup_gpio_button()
10. {
11.     ESP_LOGI(TAG, "gpio button init on pin %d", FEATURE_TOGGLE_PIN);
12.     button_config_t cfg = {
13.         .type = BUTTON_TYPE_GPIO,
14.         .gpio_button_config = {
15.             .gpio_num = FEATURE_TOGGLE_PIN,
16.             .active_level = 1,
17.         },
18.     };
19.     button_handle_t btn = iot_button_create(&cfg);
20.     iot_button_register_cb(btn, BUTTON_LONG_PRESS_START, button_long_press_hold_cb, "hold");
21. }

GeSHi © Codebox Plus Extension

Code: [Select all] [Expand/Collapse]

1. #define WAKEUP_PIN FEATURE_TOGGLE_PIN
2. #define WAKEUP_LEVEL 1
3.  
4. void init_deep_sleep(void)
5. {
6.     ESP_LOGI(TAG, "init deep sleep on pin %d", WAKEUP_PIN);
7.     esp_sleep_enable_ext0_wakeup(WAKEUP_PIN, WAKEUP_LEVEL);
8.     printf("wakeup cause: %d\n", esp_sleep_get_wakeup_cause());
9.     switch (esp_sleep_get_wakeup_cause()) {
10.         case ESP_SLEEP_WAKEUP_EXT0: {
11.             printf("Wake up from ext0\n");
12.             break;
13.         }
14.         default: {
15.             printf("Not a deep sleep reset\n");
16.         }
17.     }
18. }
19.  
20. void enter_deep_sleep(void)
21. {
22.     esp_deep_sleep_start();
23. }

GeSHi © Codebox Plus Extension