ESP32 Forum

ets Jul 29 2019 12:21:46

rst:0x8 (TG1WDT_SYS_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:5640
load:0x40078000,len:12696
load:0x40080400,len:4292
entry 0x400806b0
W (54) boot.esp32: PRO CPU has been reset by WDT.
W (54) boot.esp32: WDT reset info: PRO CPU PC=0x40042a55
W (56) boot.esp32: WDT reset info: APP CPU PC=0x401cce8e (waiti mode)
ets Jul 29 2019 12:21:46

rst:0x8 (TG1WDT_SYS_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:5640
load:0x40078000,len:12696
load:0x40080400,len:4292
entry 0x400806b0
W (54) boot.esp32: PRO CPU has been reset by WDT.
W (54) boot.esp32: WDT reset info: PRO CPU PC=0x40042a55
W (56) boot.esp32: WDT reset info: APP CPU PC=0x401cce8e (waiti mode)

1. 您可以提供更多信息来让我们更加了解您的问题吗，比如您是用的是什么模组，打算编译哪个版本？
2. 您的模组之前编译和烧录 AT 工程是正常的吗？

加载的是micropython固件，版本号为esp32-20210623-v1.16.bin，加载后正常能进入pyhon编译环境，之后对GPIO6进行Pin操作，系统莫名重启进入WDT RESET waiting mode 模式

您可以先尝试烧录一下 ESP-IDF 的示例，看看能不能成功，可以先排除一下编译环境问题

重启bootload引导就停在waiting mode 模式， 电脑和ESP32串口无法正常连接，如何烧录呢？还有没有其他恢复出厂的方式，我刚接触ESP32不是很懂


open serial error, please try again.
open serial error, please try again.