xiang8000 wrote: ↑Wed Apr 22, 2020 2:37 am
启动代码如下,错误在最后两行,对应的出错代码为:
I (31) boot: ESP-IDF v4.2-dev-1054-g7d0f1536e-dirty 2nd stage bootloader
I (31) boot: compile time 10:13:53
I (31) boot: chip revision: 1
I (32) boot_comm: chip revision: 1, min. bootloader chip revision: 0
I (32) boot.esp32: SPI Speed : 40MHz
I (33) boot.esp32: SPI Mode : DIO
I (34) boot.esp32: SPI Flash Size : 4MB
I (34) boot: Enabling RNG early entropy source...
I (35) boot: Partition Table:
I (35) boot: ## Label Usage Type ST Offset Length
I (36) boot: 0 nvs WiFi data 01 02 00009000 00006000
I (37) boot: 1 phy_init RF data 01 01 0000f000 00001000
I (38) boot: 2 factory factory app 00 00 00010000 00100000
I (39) boot: End of partition table
I (39) boot_comm: chip revision: 1, min. application chip revision: 0
I (40) esp_image: segment 0: paddr=0x00010020 vaddr=0x3f400020 size=0x2e84c (190540) map
I (114) esp_image: segment 1: paddr=0x0003e874 vaddr=0x3ffbdb60 size=0x017a4 ( 6052) load
I (117) esp_image: segment 2: paddr=0x00040020 vaddr=0x400d0020 size=0xa5ec8 (679624) map
0x400d0020: _stext at ??:?
I (376) esp_image: segment 3: paddr=0x000e5ef0 vaddr=0x3ffbf304 size=0x025bc ( 9660) load
I (380) esp_image: segment 4: paddr=0x000e84b4 vaddr=0x40080000 size=0x00404 ( 1028) load
0x40080000: _WindowOverflow4 at /home/xiang/esp-idf/components/freertos/xtensa/xtensa_vectors.S:1730
I (381) esp_image: segment 5: paddr=0x000e88c0 vaddr=0x40080404 size=0x131f0 ( 78320) load
I (426) boot: Loaded app from partition at offset 0x10000
I (426) boot: Disabling RNG early entropy source...
I (426) cpu_start: Pro cpu up.
I (426) cpu_start: Application information:
I (427) cpu_start: Project name: vendor_client
I (428) cpu_start: App version: v4.2-dev-1054-g7d0f1536e-dirty
I (428) cpu_start: Compile time: Apr 22 2020 10:13:38
I (429) cpu_start: ELF file SHA256: 705cd9ffced62fe2...
I (430) cpu_start: ESP-IDF: v4.2-dev-1054-g7d0f1536e-dirty
I (431) cpu_start: Starting app cpu, entry point is 0x400814dc
0x400814dc: call_start_cpu1 at /home/xiang/esp-idf/components/esp32/cpu_start.c:277
I (0) cpu_start: App cpu up.
I (433) heap_init: Initializing. RAM available for dynamic allocation:
I (433) heap_init: At 3FFAFF10 len 000000F0 (0 KiB): DRAM
I (434) heap_init: At 3FFB6388 len 00001C78 (7 KiB): DRAM
I (435) heap_init: At 3FFB9A20 len 00004108 (16 KiB): DRAM
I (435) heap_init: At 3FFBDB5C len 00000004 (0 KiB): DRAM
I (436) heap_init: At 3FFCC1B8 len 00013E48 (79 KiB): DRAM
I (437) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
I (438) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (438) heap_init: At 400935F4 len 0000CA0C (50 KiB): IRAM
I (439) cpu_start: Pro cpu start user code
I (450) spi_flash: detected chip: generic
I (450) spi_flash: flash io: dio
I (450) cpu_start: Starting scheduler on PRO CPU.
I (0) cpu_start: Starting scheduler on APP CPU.
I (452) Client: Initializing...
use esp timer !!!
I (482) gpio: GPIO[0]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:3
E (482) Client: bluetooth_init initialize controller failed
E (482) Client: esp32_bluetooth_init failed (err 258)