ets Jul 29 2019 12:21:46
rst:0x8 (TG1WDT_SYS_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:5640
load:0x40078000,len:12696
load:0x40080400,len:4292
entry 0x400806b0
W (54) boot.esp32: PRO CPU has been reset by WDT.
W (54) boot.esp32: WDT reset info: PRO CPU PC=0x40042a55
W (56) boot.esp32: WDT reset info: APP CPU PC=0x401cce8e (waiti mode)
ets Jul 29 2019 12:21:46
rst:0x8 (TG1WDT_SYS_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:5640
load:0x40078000,len:12696
load:0x40080400,len:4292
entry 0x400806b0
W (54) boot.esp32: PRO CPU has been reset by WDT.
W (54) boot.esp32: WDT reset info: PRO CPU PC=0x40042a55
W (56) boot.esp32: WDT reset info: APP CPU PC=0x401cce8e (waiti mode)
启动之后无法进入python编译环境提示符>>>,怎么办呢?
Re: 启动之后无法进入python编译环境提示符>>>,怎么办呢?
1. 您可以提供更多信息来让我们更加了解您的问题吗,比如您是用的是什么模组,打算编译哪个版本?
2. 您的模组之前编译和烧录 AT 工程是正常的吗?
2. 您的模组之前编译和烧录 AT 工程是正常的吗?
Re: 启动之后无法进入python编译环境提示符>>>,怎么办呢?
加载的是micropython固件,版本号为esp32-20210623-v1.16.bin,加载后正常能进入pyhon编译环境,之后对GPIO6进行Pin操作,系统莫名重启进入WDT RESET waiting mode 模式
- Attachments
-
- aec13dee2bb3df7a59904ab58399c91.jpg (1.5 MiB) Viewed 10835 times
Re: 启动之后无法进入python编译环境提示符>>>,怎么办呢?
您可以先尝试烧录一下 ESP-IDF 的示例,看看能不能成功,可以先排除一下编译环境问题
Re: 启动之后无法进入python编译环境提示符>>>,怎么办呢?
重启bootload引导就停在waiting mode 模式, 电脑和ESP32串口无法正常连接,如何烧录呢?还有没有其他恢复出厂的方式,我刚接触ESP32不是很懂
open serial error, please try again.
open serial error, please try again.
open serial error, please try again.
open serial error, please try again.
Who is online
Users browsing this forum: No registered users and 108 guests