ESP32 Forum

Code: Select all

#include "esp_camera.h"
#define CAMERA_MODEL_AI_THINKER
#include "camera_pins.h"
#include "SD_MMC.h"
#include "Arduino.h"
#include "BluetoothSerial.h"
//#include <EEPROM.h>
//#include "Base64.h"


BluetoothSerial SerialBT;

//RTC_DATA_ATTR static int cbCount = 0;

void initSD(){
  Serial.println("Starting SD Card");  
  if(!SD_MMC.begin()){
    Serial.println("SD Card Mount Failed");
    ESP.restart();
  }else{
    Serial.println("SD Card Mount Succes");
  }
 
  uint8_t cardType = SD_MMC.cardType();
  if(cardType == CARD_NONE){
    Serial.println("No SD Card attached");
    return;
  }
}

void initCamera(){
  camera_config_t config;
  config.ledc_channel = LEDC_CHANNEL_0;
  config.ledc_timer = LEDC_TIMER_0;
  config.pin_d0 = Y2_GPIO_NUM;
  config.pin_d1 = Y3_GPIO_NUM;
  config.pin_d2 = Y4_GPIO_NUM;
  config.pin_d3 = Y5_GPIO_NUM;
  config.pin_d4 = Y6_GPIO_NUM;
  config.pin_d5 = Y7_GPIO_NUM;
  config.pin_d6 = Y8_GPIO_NUM;
  config.pin_d7 = Y9_GPIO_NUM;
  config.pin_xclk = XCLK_GPIO_NUM;
  config.pin_pclk = PCLK_GPIO_NUM;
  config.pin_vsync = VSYNC_GPIO_NUM;
  config.pin_href = HREF_GPIO_NUM;
  config.pin_sscb_sda = SIOD_GPIO_NUM;
  config.pin_sscb_scl = SIOC_GPIO_NUM;
  config.pin_pwdn = PWDN_GPIO_NUM;
  config.pin_reset = RESET_GPIO_NUM;
  config.xclk_freq_hz = 20000000;
  config.pixel_format = PIXFORMAT_JPEG;
  //init with high specs to pre-allocate larger buffers
  if(psramFound()){
    config.frame_size = FRAMESIZE_UXGA;
    config.jpeg_quality = 2;
    config.fb_count = 2;
  } else {
    config.frame_size = FRAMESIZE_SVGA;
    config.jpeg_quality = 2;
    config.fb_count = 1;
  }

  // camera init
  esp_err_t err = esp_camera_init(&config);
  if (err != ESP_OK) {
    Serial.printf("Camera init failed with error 0x%x", err);
    ESP.restart();
  }

}


void initBT(){
  if(!SerialBT.begin("ESP32CAM-CLASSIC-BT")){
    Serial.println("An error occurred initializing Bluetooth");
    ESP.restart();
  }else{
    Serial.println("Bluetooth initialized");
  }
  //Bluetooth를 통한 Serial Port Profile을 시작 -> bluetooth 통신이 이루어질 때마다 실행되는 함수
  SerialBT.register_callback(btCallback);
  
  Serial.println("The device started, now you can pair it with bluetooth");
}





void btCallback(esp_spp_cb_event_t event, esp_spp_cb_param_t *param){
  if(event == ESP_SPP_SRV_OPEN_EVT){  // BT Server가 처음 시작되면 발생하는 Event
    Serial.println("Client Connected!");
    
  }else if(event == ESP_SPP_DATA_IND_EVT){  // BT SPP로 data를 수신하면 발생하는 Event
    // len : Length of data   handle : Information of which is(are) connected
    Serial.printf("ESP_SPP_DATA_IND_EVT len=%d, handle=%d\n\n", param->data_ind.len, param->data_ind.handle);

    // 수신한 Data는 String 형식이므로 이를 int로 바꾸어 주는 작업
    String stringRead = String(*param->data_ind.data);
    int paramInt = stringRead.toInt() - 48;
    Serial.printf("paramInt: %d\n", paramInt); 
    setCameraParam(paramInt);
  }
}



void setCameraParam(int paramInt){
  sensor_t *s = esp_camera_sensor_get();
  switch(paramInt){
    case 5:{
      s->set_framesize(s, FRAMESIZE_UXGA);
      
      pinMode(12,INPUT);
      for(int i=0;i<10;i++){
        if(digitalRead(12)==HIGH){
          capture();
          delay(500);
        }
      }
      
      break;
    }
    case 4:
      s->set_framesize(s, FRAMESIZE_UXGA);
    break;

    case 3:
      s->set_framesize(s, FRAMESIZE_SXGA);
    break;

    case 2:
      s->set_framesize(s, FRAMESIZE_XGA);
    break;

    case 1:
      s->set_framesize(s, FRAMESIZE_SVGA);
    break;

    case 0:
    default:
      s->set_framesize(s, FRAMESIZE_VGA);
    break;
  }

  capture();
}

void capture(){
  camera_fb_t *fb = NULL;
  esp_err_t res = ESP_OK;
  fb = esp_camera_fb_get();
  if(!fb){
    esp_camera_fb_return(fb);
    return;
  }

  if(fb->format != PIXFORMAT_JPEG){
    return;
  }

 
  writeSerialBT(fb);
  saveSD(fb);
  esp_camera_fb_return(fb);
}

void writeSerialBT(camera_fb_t *fb){
  SerialBT.write(fb->buf, fb->len);
  SerialBT.flush();
}

void saveSD(camera_fb_t *fb){
    fs::FS &fs = SD_MMC;
    
    String path = "/picture" + ((String) cbCount++) +".jpg";
    Serial.printf("Picture file name: %s\n", path.c_str());
  
    File file = fs.open(path.c_str(), FILE_WRITE);
    if(!file){
      Serial.println("Failed to open file in writing mode");
      Serial.println("Exiting now"); 
      ESP.restart();   
    }
    else {
      file.write(fb->buf, fb->len); 
      Serial.printf("Saved file to path in SD card : %s\n", path.c_str());
    }
    file.close();
}







void setup() {
  Serial.begin(115200);
  initCamera();
  initSD();
  initBT();
}

void loop() { }