Pixy2 I2C communications is garbage when compiled with Arduino-ESP32 core 3.0.4 but works fine with version 3.0.3
Posted: Fri Aug 02, 2024 7:04 pm
Hi
I have an ESP32-WROOM-32E board communicating with Pixy2 camera using I2C connection and runs fine when compiled in Arduino IDE 2.3.2 with Arduino-ESP32 core 3.0.3. I updated to Arduino-ESP32 core 3.0.4 and then after code compilation and download, the serial communications are garbage like shown below. After reverting back to Arduino-ESP32 core 3.0.3, the I2C serial communication was fine again. It seems to me version 3.0.4 breaks/corrupts the I2C communication with the Pixy2.
The current Pixy2 firmware is running on the Pixy2 camera and the latest Pixy2 libraries are used in my application. https://pixycam.com/downloads-pixy2/
/�L��٥����i2��HȊ2����>�#�,�K�v��+� f�Z
Regards
At
I have an ESP32-WROOM-32E board communicating with Pixy2 camera using I2C connection and runs fine when compiled in Arduino IDE 2.3.2 with Arduino-ESP32 core 3.0.3. I updated to Arduino-ESP32 core 3.0.4 and then after code compilation and download, the serial communications are garbage like shown below. After reverting back to Arduino-ESP32 core 3.0.3, the I2C serial communication was fine again. It seems to me version 3.0.4 breaks/corrupts the I2C communication with the Pixy2.
The current Pixy2 firmware is running on the Pixy2 camera and the latest Pixy2 libraries are used in my application. https://pixycam.com/downloads-pixy2/
/�L��٥����i2��HȊ2����>�#�,�K�v��+� f�Z
Regards
At