help with jtag

ulaoulao
Posts: 21
Joined: Thu Jun 13, 2024 6:25 pm

help with jtag

Postby ulaoulao » Fri Jun 14, 2024 5:52 pm

It woudl be very kind if someone would release the spam bot on my account so I can interact better


I was able to get the esp-inf github env. all setup on my esp32-s3 device. I was also finally able to compile and flash it to the device. But now I can not use the jtag. I look at it with usbview and it shows an attempt to add the driver but it didnt stay connected.

Reading this page is not helping
https://warped3.substack.com/p/how-to-d ... tc-1-using

Changing to winusb just makes the cdc driver fail and I can no longer flash it.


I get this error but I'm usrse my issues are the device. I'm using a DEKitC wroom32. I use the top USB to flash so I'm guesssing that is also Jtag.

[OpenOCD]
Info : Listening on port 6666 for tcl connections

[OpenOCD]
Info : Listening on port 4444 for telnet connections

[OpenOCD]
L Error: esp_usb_jtag: could not find or open device!

[OpenOCD]
L C:\Users\Administrator\.espressif\tools\openocd-esp32\v0.12.0-esp32-20240318/openocd-esp32/share/openocd/scripts/target/esp_common.cfg:9: Error:
at file "C:\Users\Administrator\.espressif\tools\openocd-esp32\v0.12.0-esp32-20240318/openocd-esp32/share/openocd/scripts/target/esp_common.cfg", line 9

[OpenOCD]
For assistance with OpenOCD errors, please refer to our Troubleshooting FAQ: https://github.com/espressif/openocd-es ... ooting-FAQ
[OpenOCD]
OpenOCD Exit with non-zero error code 1


This is what uysbview shosw me
Image

Who is online

Users browsing this forum: Google [Bot] and 127 guests