ESP32 Forum

Posted: **Tue Jul 18, 2023 5:46 am**

Hello,

I'm developing a Zigbee device using esp32-h2 & esp-idf v5.1 . I compiled and tested the HA Sample Light with zigbee2mqtt as a coordinator.
In ON/OFF Cluster I need ESP_ZB_ZCL_ATTR_ON_OFF_START_UP_ON_OFF attribute. so I created a on/off cluster in custom way.
Here is the code

Code: Select all

 uint8_t on_off = 0,start_onoff =0;
esp_zb_attribute_list_t *esp_zb_onoff_cluster_cus = esp_zb_zcl_attr_list_create(ESP_ZB_ZCL_CLUSTER_ID_ON_OFF);
esp_zb_on_off_cluster_add_attr(esp_zb_onoff_cluster_cus, ESP_ZB_ZCL_ATTR_ON_OFF_ON_OFF_ID, &on_off);
esp_zb_on_off_cluster_add_attr(esp_zb_onoff_cluster_cus, ESP_ZB_ZCL_ATTR_ON_OFF_START_UP_ON_OFF, &start_onoff);

After creating the endpoint & Register I register the call back esp_zb_device_add_set_attr_value_cb(attr_cb);

Code: Select all

void attr_cb(uint8_t status, uint8_t endpoint, uint16_t cluster_id, uint16_t attr_id, void *new_value)
{
ESP_LOGI(TAG, "Data received on on/off Cluster attr_id %d EP %d\n",attr_id,endpoint);
if (cluster_id == ESP_ZB_ZCL_CLUSTER_ID_ON_OFF) {
    uint8_t value = *(uint8_t *)new_value;
    if (attr_id == ESP_ZB_ZCL_ATTR_ON_OFF_ON_OFF_ID) {
        /* implemented light on/off control */
        ESP_LOGI(TAG, "on/off light set to %hd Endpoint %d", value,endpoint);
        SET_RELAY1_LED_STATUS(value);
    }
    else{
         ESP_LOGI(TAG, "Data received on on/off Cluster attr_id %d value %hd EP %d\n",attr_id,value,endpoint);
    }

} else {
    /* Implement some actions if needed when other cluster changed */
    ESP_LOGI(TAG, "cluster:0x%x, attribute:0x%x changed ", cluster_id, attr_id);
	}
}

ON/OFF attributer Commands like ON, OFF, TOGGLE from Coordinator, I'm able to receive in "attr_cb" callback. But ESP_ZB_ZCL_ATTR_ON_OFF_START_UP_ON_OFF commands I'm not able to receive.

Is anything need to do for that?

Thanks in advance

ESP32 Forum

Receive zigbee attribute write data in callback

Receive zigbee attribute write data in callback