Receive zigbee attribute write data in callback

[Bosemani Raja]

Hello,

I'm developing a Zigbee device using esp32-h2 & esp-idf v5.1 . I compiled and tested the HA Sample Light with zigbee2mqtt as a coordinator.
In ON/OFF Cluster I need ESP_ZB_ZCL_ATTR_ON_OFF_START_UP_ON_OFF attribute. so I created a on/off cluster in custom way.
Here is the code

Code: Select all

 uint8_t on_off = 0,start_onoff =0;
esp_zb_attribute_list_t *esp_zb_onoff_cluster_cus = esp_zb_zcl_attr_list_create(ESP_ZB_ZCL_CLUSTER_ID_ON_OFF);
esp_zb_on_off_cluster_add_attr(esp_zb_onoff_cluster_cus, ESP_ZB_ZCL_ATTR_ON_OFF_ON_OFF_ID, &on_off);
esp_zb_on_off_cluster_add_attr(esp_zb_onoff_cluster_cus, ESP_ZB_ZCL_ATTR_ON_OFF_START_UP_ON_OFF, &start_onoff); 

After creating the endpoint & Register I register the call back esp_zb_device_add_set_attr_value_cb(attr_cb);

Code: Select all

void attr_cb(uint8_t status, uint8_t endpoint, uint16_t cluster_id, uint16_t attr_id, void *new_value)
{
ESP_LOGI(TAG, "Data received on on/off Cluster attr_id %d EP %d\n",attr_id,endpoint);
if (cluster_id == ESP_ZB_ZCL_CLUSTER_ID_ON_OFF) {
    uint8_t value = *(uint8_t *)new_value;
    if (attr_id == ESP_ZB_ZCL_ATTR_ON_OFF_ON_OFF_ID) {
        /* implemented light on/off control */
        ESP_LOGI(TAG, "on/off light set to %hd Endpoint %d", value,endpoint);
        SET_RELAY1_LED_STATUS(value);
    }
    else{
         ESP_LOGI(TAG, "Data received on on/off Cluster attr_id %d value %hd EP %d\n",attr_id,value,endpoint);
    }

} else {
    /* Implement some actions if needed when other cluster changed */
    ESP_LOGI(TAG, "cluster:0x%x, attribute:0x%x changed ", cluster_id, attr_id);
	}
}

ON/OFF attributer Commands like ON, OFF, TOGGLE from Coordinator, I'm able to receive in "attr_cb" callback. But ESP_ZB_ZCL_ATTR_ON_OFF_START_UP_ON_OFF commands I'm not able to receive.

Is anything need to do for that?

Thanks in advance