ESP-WIFI MESH problem
Posted: Thu Apr 13, 2023 11:49 am
I just use the ESP32_S3 ,by using the Free-RTOS as the version is release/V5.0.
and now I have a problem, I can not resolve it.
the Problem is:
When I sent 800 bytes data from "Root" to the "stations" using the WIFI MESH, it will case about 50% frames lost.
the mesh set is as below:
mesh_flag: MESH_DATA_GROUP
mesh_proto: MESH_PROTO_JSON(or MESH_PROTO_BIN, it is the same problem)
mesh_tos: MESH_TOS_P2P
data size: about 800 bytes
the mesh data sent Time interval: 300ms
at the begin, for about 18 secs, it is OK, no frames lost.
but if the ESP-logo print " I (18897): mesh: [FAIL][1]root:0, fail:1, normal:0, <pre>backoff:0[weak] ", frames will start to be lost.
I know this has some error happened, but can not know where?
can anybody help me, thanks!
and now I have a problem, I can not resolve it.
the Problem is:
When I sent 800 bytes data from "Root" to the "stations" using the WIFI MESH, it will case about 50% frames lost.
the mesh set is as below:
mesh_flag: MESH_DATA_GROUP
mesh_proto: MESH_PROTO_JSON(or MESH_PROTO_BIN, it is the same problem)
mesh_tos: MESH_TOS_P2P
data size: about 800 bytes
the mesh data sent Time interval: 300ms
at the begin, for about 18 secs, it is OK, no frames lost.
but if the ESP-logo print " I (18897): mesh: [FAIL][1]root:0, fail:1, normal:0, <pre>backoff:0[weak] ", frames will start to be lost.
I know this has some error happened, but can not know where?
can anybody help me, thanks!