mongoose setup
Posted: Sun Aug 20, 2017 11:34 am
Hi,
after some days off, I relaunched my attempts with mongoose yesterday.
The challenge: viewtopic.php?f=2&t=2695
The Code:
Now I was focused building the mongoose lib manually, to find out what happend,
and vola, I got a complete working lib with:
How do I bring the -mlongcalls switch to the project?
EDIT:
I also got a complete lib without -mloncalls, but this was not linkable (call8).
So the project setup meight be little different to just include the switch.
How do I make a proper setup?
after some days off, I relaunched my attempts with mongoose yesterday.
The challenge: viewtopic.php?f=2&t=2695
The Code:
Code: Select all
#include "freertos/FreeRTOS.h"
#include "sdkconfig.h"
#include "esp_wifi.h"
#include "esp_system.h"
#include "esp_event.h"
#include "esp_event_loop.h"
#include "esp_log.h"
#include "nvs_flash.h"
#include "spiffs_vfs.h"
#include "esp_vfs.h"
#include "esp_vfs_fat.h"
#include "driver/gpio.h"
#include <sys/fcntl.h>
#include "string.h"
#include "mongoose.h"
static struct mg_serve_http_opts s_opts;
static void mongoose_event_handler(struct mg_connection *nc, int ev, void *evData)
{
struct http_message *hm = (struct http_message *) evData;
if (ev == MG_EV_HTTP_REQUEST) {
mg_serve_http(nc, hm, s_opts);
}
}
void mongooseTask(void *data)
{
struct mg_mgr mgr;
mg_mgr_init(&mgr, NULL);
struct mg_connection *nc = mg_bind(&mgr, ":80", mongoose_event_handler);
if (nc == NULL) {
printf( "No connection from the mg_bind()\n");
vTaskDelete(NULL);
return;
}
mg_set_protocol_http_websocket(nc);
memset(&s_opts, 0, sizeof(s_opts));
s_opts.document_root= "/spiffs/";
s_opts.index_files = "index.html";
while (1) {
mg_mgr_poll(&mgr, 200);
}
mg_mgr_free(&mgr);
}
esp_err_t wifi_event_handler(void *ctx, system_event_t *event)
{
switch (event->event_id){
case SYSTEM_EVENT_AP_START:
printf("Accesspoint connected\n");
break;
case SYSTEM_EVENT_AP_STOP:
printf("Accesspoint stopped\n");
break;
case SYSTEM_EVENT_AP_STACONNECTED:
printf("Accesspoint Station connected\n");
xTaskCreate(&mongooseTask, "mongooseTask", 20000, NULL, 5, NULL);
break;
case SYSTEM_EVENT_AP_STADISCONNECTED:
printf("Accesspoint Station disconnected\n");
break;
case SYSTEM_EVENT_AP_PROBEREQRECVED:
printf("Accesspoint Probe Request received\n");
break;
default:
break;
}
return ESP_OK;
}
static void init_wifi(void)
{
tcpip_adapter_init();
tcpip_adapter_ip_info_t info = { 0, };
IP4_ADDR(&info.ip, 192, 168, 3, 1);
IP4_ADDR(&info.gw, 192, 168, 3, 1);
IP4_ADDR(&info.netmask, 255, 255, 255, 0);
ESP_ERROR_CHECK(tcpip_adapter_dhcps_stop(TCPIP_ADAPTER_IF_AP));
ESP_ERROR_CHECK(tcpip_adapter_set_ip_info(TCPIP_ADAPTER_IF_AP, &info));
ESP_ERROR_CHECK(tcpip_adapter_dhcps_start(TCPIP_ADAPTER_IF_AP));
ESP_ERROR_CHECK( esp_event_loop_init(wifi_event_handler, NULL) );
wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
ESP_ERROR_CHECK( esp_wifi_init(&cfg) );
ESP_ERROR_CHECK( esp_wifi_set_storage(WIFI_STORAGE_RAM) );
ESP_ERROR_CHECK( esp_wifi_set_mode(WIFI_MODE_AP) );
wifi_config_t ap_config = {
.ap = {
.ssid="ESP32",
.ssid_len=0,
.password="pwpwpwpw",
.channel=0,
.authmode=WIFI_AUTH_WPA2_PSK,
.ssid_hidden=0,
.max_connection=4,
.beacon_interval=100
}
};
ESP_ERROR_CHECK( esp_wifi_set_config(WIFI_IF_AP, &ap_config) );
ESP_ERROR_CHECK( esp_wifi_start() );
}
void app_main(void)
{
nvs_flash_init();
vfs_spiffs_register();
if (spiffs_is_mounted) { printf("==== spiffs mounted .... ====\r\n"); }
init_wifi();
gpio_set_direction(GPIO_NUM_2, GPIO_MODE_OUTPUT);
int level = 0;
while (true) {
gpio_set_level(GPIO_NUM_2, level);
level = !level;
vTaskDelay(300 / portTICK_PERIOD_MS);
}
}
and vola, I got a complete working lib with:
Code: Select all
xtensa-esp32-elf-gcc -mlongcalls -I/d/Source/esp/esp-idf/components/vfs/include -I/d/Source/esp/esp-idf/components/lwip/include/lwip -I/d/Source/esp/esp-idf/components/lwip/include/lwip/port -I/d/Source/esp/esp-idf/components/esp32/include -I/d/Source/esp/webserver/build/include -I /d/Source/esp/esp-idf/components/freertos/include -I/d/Source/esp/esp-idf/components/soc/esp32/include -DESP_PLATFORM=1 -DMG_ENABLE_HTTP=1 -DMG_ENABLE_FILESYSTEM=1 -c mongoose.c -o mongoose.o
xtensa-esp32-elf-ar -rcs libmongoose.a mongoose.o
EDIT:
I also got a complete lib without -mloncalls, but this was not linkable (call8).
So the project setup meight be little different to just include the switch.
How do I make a proper setup?